A4822372068822_1
Service Bulletin Details
Public Details for: A4822372068822_1
This bulletin provides instructions for when the steering warning lamp is illuminated and dtc C11DF29 is logged.
- 2023 - 2022 - 2021 - 2020 - 2019 -
Models from 2019
| 2019 AUDI Q7 |
| 2019 AUDI Q8 |
Technical Service Bulletin 48 Rear wheel steering control unit - DTC C11DF29 Rack position implausible 48 22 37 2068822/1 December 7, 2022. Model(s) Year Q7, and Q8 2019 – 2023 SQ7, SQ8, and RS Q8 2020 - 2023 VIN Range Vehicle-Specific Equipment All Not Applicable Condition Customer states: The steering warning lamp is on. Workshop findings: DTC C11DF29 Rack Position Implausible (symptom code 205) is logged in the J1019 rear-wheel steering (address word 00CB). Technical Background Software issue. Production Solution Not applicable. Service SVM Update Instructions 1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions. 2. Update the J1019 (00CB) using the SVM action code as listed in the table below, if necessary: Model Q7,Q8 Old Software Part Number 4M0909145E Old Software Version 0698 New Software Part Number New Software Version (or higher) (or higher) 4M0909145E 0699 SVM Code Input 44A037 Page 1 of 2 © 2022 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Warranty Claim Type: 110 up to 48 Months/50,000 Miles. G10 for CPO Covered Vehicles – Verify Owner. If the vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 4841 Damage Code: 0040 Labor Operations: Software Update (Includes checking for DTCs) 0151 0000 Time stated on the diagnostic protocol (Max 50 TU) Diagnostic Time: GFF No allowance 0 TU Road test prior to the service procedure No allowance 0 TU Road test after the service procedure No allowance 0 TU As per TSB 2068822/1 Claim Comment: All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Additional Information All part and service references provided in this TSB (2068822) are subject to change and/or removal. Always check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair. ©2022 Audi of America, Inc. All rights reserved. The information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Page 2 of 2 © 2022 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.