SSM71358

Special Service Message
NOTE: A Special Service Message is a formal communication issued by Jaguar and carries the
same importance of a Technical Service Bulletin. An SSM is a quick method of communicating
"Need To Know" information to the technical service community. SSM's may be issued in
advance of a technical bulletin or may be the only communication on a given topic. All
information contained in Jaguar technical communications are intended for use by trained,
professional technicians with the knowledge, tools, and equipment required to complete the
procedure correctly and safely. It informs the Technicians of conditions that may occur on
some vehicles, or provides information that could assist in correct vehicle and diagnostic
service.
SSM 71358 - XJ Door veneer speaker noise `tizz / buzz`
Models : X351 - XJ
Engineer Blackhall David
Name :
Last 2 3 - 0 1 - 2 0 1 4 1 3 : 2 6 : 4 3
Modified :
Category : Body
Symptom : 107000 Interior Trim
Content : Issue : T i z z i ng / buz z i ng so u n d fro m do o r s pe a ke r
when veneer reinstalled
Cause: Fixings incorrectly located / not renewed
Action:
When refitting a door veneer please note the
following;
1) Veneer clips MUST be renewed when refitting
back to door casing.(see arrow 1 for an example of
a veneer clip) Part Number C2D10041 - 2 of
required per door veneer.
• These clips will engage onto the veneer backing
with a positive click.
• NEVER reuse old clips.
2) Check the metal clips are fully engaged. (see
arrow 2 for an example of a metal clip fully
engaged)
3) Check the condition of the staked fixings.
These should have a good purchase on the metal
ring beneath them and not be loose (see arrow 3
for an example of the staked fixings)
File : XJ Speaker Tizz image - SSM.pdf
Jaguar Land Rover Limited 2000 - 2013 (Rel. 2601)