UPS3013-1bNAS1

Page 1 of 2
TECHNICAL BULLETIN
UPS3013-1bNAS1
02 JUL 2013
© Jaguar Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with the knowledge, tools,
and equipment required to do the job properly and safely. It informs these Technicians of conditions that may occur on some
vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by 'do-ityourselfers'. If you are not a Retailer, do not assume that a condition described affects your vehicle. Contact an authorized
Jaguar service facility to determine whether this bulletin applies to a specific vehicle.
SECTION: 413-01
Update Prior to Sale: Instrument Cluster Software Update
AFFECTED VEHICLE RANGE:
F-TYPE (X152)
Model Year:
VIN:
2014
K00317-K00734
MARKETS:
NAS
CONDITION SUMMARY:
Situation: The date format on the Touch Screen (TS) System Settings / Clock Adjust menu may be unable to be
changed from 'DD/MM/YYYY' to 'MM/DD/YYYY' due to a software issue within the Instrument Cluster (IC).
NOTE: The date will only be displayed when accessing the Touch Screen (TS) Systems Settings /
Clock Adjust menu.
Action: Retailers are required to HOLD all affected vehicles within the listed VIN range that are in their control
and refrain from releasing the vehicles for new or used vehicle sale pending completion of the rework action
detailed in this Technical Bulletin. Unsold vehicles should have this performed as part of the Pre-Delivery
Inspection (PDI) process. Affected vehicles already in the hands of customers should be updated at the next
available opportunity.
PARTS:
No parts required
SPECIAL TOOLS:
NOTE: This document is an 'Active Bulletin' that will display a functional programming shortcut if
accessed within a diagnostic session using SDD.
IDS with latest IDS-DVD and Calibration File; first available on DVD134.05 V.137
Jaguar Land Rover-approved Midtronics battery power supply
WARRANTY:
NOTE: Check DDW to ensure that the vehicle is affected by this program prior to undertaking any
rework action. Repair procedures are under constant review, and therefore times / prices are subject to
change; those quoted here must be taken as guidance only. Refer to the Repair Times Searcher (RTS) on
http://topix.jaguar.jlrint.com/topix/service/procedure/420678/ODYSSEY_FSA/G1655536/e... 7/3/2013
Page 2 of 2
TOPIx to obtain the latest repair time. At the time of confirming a booking for vehicle repair, ensure that
all outstanding Service Actions are identified to ensure the correct parts are available and adequate
workshop time is allocated for repairs to be completed at one visit.
Warranty claims must be submitted quoting Program Code 'K181' together with the relevant Option Code from the
table. The SRO and part information listed have been included for information only. The Option Code(s) that allows for
the drive in / drive out allowance can only be claimed if the vehicle is brought back into the workshop for this action
alone to be undertaken.
This program is valid for a limited time only. Warranty claims with a repair date prior to the 14 December 2013
closure date must be submitted for payment within 30 calendar days of completion of the repair.
PROGRAM
CODE
OPTION
CODE
SRO
K181
B
Configure Existing Instrument
Cluster
86.99.75 0.30
-
-
K181
C
Configure Existing Instrument
Cluster
Drive in/drive out
86.99.75 0.30
10.10.10 0.10
-
-
DESCRIPTION
TIME
(HOURS)
PARTS
QTY. /
VALUE
NOTE: Normal Warranty policies and procedures apply
SERVICE INSTRUCTION:
1.
CAUTION: Ensure all ignition 'ON' / ignition 'OFF' requests are carried out; failure to perform
these steps may cause damage to control modules in the vehicle.
CAUTION: A Jaguar Land Rover-approved Midtronics battery power supply must be connected
to the vehicle battery during IDS / SDD diagnosis / module programming.
NOTE: IDS must be loaded with DVD134.05 v.137 or later.
Connect the Jaguar Land Rover-approved Midtronics battery power supply to the vehicle battery.
2. Turn ignition 'ON' (engine not running).
3. Connect the Integrated Diagnostic System (IDS) to the vehicle and begin a new Symptom Driven Diagnostics
(SDD) session.
4. Follow the on-screen prompts, allowing SDD to read the VIN and identify the vehicle and initiating the data
collect sequence.
5. Select 'Diagnosis' from the Session Type screen.
6. Select the 'Selected Symptoms' tab, and then select the following:

 Electrical > Instruments > Warning lamps
7. Select the 'Extras' tab.
8. From the Recommendations tab, select Run to perform the 'Configure existing module – Instrument cluster
control module' option.
9. Follow all on-screen instructions to complete this task.
10. Exit the current session.
11. Disconnect the IDS and the battery power supply from the vehicle.
http://topix.jaguar.jlrint.com/topix/service/procedure/420678/ODYSSEY_FSA/G1655536/e... 7/3/2013