WNS8
Service Bulletin Details
Public Details for: WNS8
Porsche intranet posting with information on wns8 - reprogramming all-wheel drive control unit.
Models from 2023
2023 PORSCHE MACAN |
Models from 2022
2022 PORSCHE MACAN |
WNS8 Workshop campaign - Reprogramming all-wheel drive control unit WNS8 Workshop campaign - Re-programming all-wheel drive control unit ID Number WNS8 Models Macan (95B) Model Years 2022 - 2023 VIN List Attached Number of Affected VINs 25,424 Issue Description On the affected vehicles, the PTO shaft protection function in the all-wheel drive control unit was adjusted in the software to optimize the driving dynamics. As a result, greater torque is available with a large steering angle. In certain driving conditions (when parking or cornering), this can be perceived by the customer as a cracking noise on the front axle due to increased axial forces on the PTO shaft. To prevent this from happening, the all-wheel drive control unit must be re-programmed using an updated data record. What Dealers Should do Please arrange for this measure to be carried out as soon as possible on affected vehicles. As of the time of this posting, the repair is immediately available. Before performing the campaign please determine if the SW version is at or above the campaign target software value by checking the extended identifications of the All-wheel drive control unit. If the software level of the All-wheel drive control unit is AT OR ABOVE the software in the table below, performing the campaign is NOT necessary. If the ve- 1 WNS8 Workshop campaign - Re-programming all-wheel drive control unit hicle is already at the target SW version, please send a Warranty/Campaigns PRMS ticket to Mitchell Grasser to have the campaign removed from this vehicle. Model Control Unit Macan / Macan All Wheel Drive S / Macan GTS / Macan T TI Number Target SW Level / Target Porsche Part Number 0900 / 95B927755GF No. 234-22 Required software PIWIS Tester 3 test software version 41.400.060 (or higher) Warranty processing Validity: The current workshop campaign will be carried out by December 8th, 2027 and will be closed on that date. Please note that warranty claims can only be processed before this date. Scope 1: Damage Code WNS8 66 000 Repair Code 1 Labour time 57 TU Please enter the campaign carried out in the Warranty and Maintenance booklet for the vehicle. Customer mobility If requested, mobility for the affected customer can be guaranteed by offering a suitable replacement vehicle. Please invoice this additional service again via WWS with the campaign scope. 2