0300322
Service Bulletin Details
Public Details for: 0300322
Front or rear axle sensor kit
- 2022 - 2021 - 2020 - 2019 - 2018 -
Models from 2022
2022 JEEP GLADIATOR |
2022 JEEP WRANGLER |
Models from 2021
2021 JEEP GLADIATOR |
2021 JEEP WRANGLER |
Models from 2020
2020 JEEP GLADIATOR |
2020 JEEP WRANGLER |
Models from 2019
2019 JEEP WRANGLER |
Models from 2018
2018 JEEP WRANGLER |
NUMBER: GROUP: DATE: 03-003-22 03 - Differential and Driveline July 14, 2022 This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC. SUBJECT: Front or Rear Axle Sensor Kit MODELS: 2018 - 2022 2020 - 2022 (JL) (JT) Jeep Wrangler Jeep Gladiator NOTE: This Informational bulletin applies to vehicles equipped with Tru-Lok Front & Rear Axles (Sales Code DSE). DISCUSSION: A service kit (Sensor Kit, Axle: 68544629AA) is available to repair the Axle Locker Sensor on the vehicles equipped with both the M210 and M220 Tru-Lok axles (Sales Code DSE). This parts kit must be used when the Axle Locker Sensor fails. Do not replace the Front or Rear Axle assemblies. Refer to the detailed service procedures available in DealerCONNECT/Service Library under: Service Info>03 - Differential and Driveline / Sensors / Removal and Installation / Axle Locker Sensor. NOTE: Customers may comment on a Service Axle Locker message displayed in the Electronic Vehicle Information Center (EVIC) for this condition. POLICY: Information Only