2069252.1
Service Bulletin Details
Public Details for: 2069252.1
Models from 2022
2022 BENTLEY CONTINENTAL GTC |
2022 BENTLEY FLYING SPUR |
Models from 2021
2021 BENTLEY FLYING SPUR |
Technical product information Warnings within the DIP for the rear steering system - DTC B200096 and/or P060700 evident within diagnostic address 00CB Russische Föderation (5RU),Australia E04 Bentley rest Asia and Australia (6E04),China 796 VW Import Comp. Ltd (Vico), Beijing (6796),Germany E02 Bentley rest Europe (6E02),Japan E03 Bentley Japan (6E03),Korea, (South) E08 Bentley South Korea (6E08),United Arab Emirates E06 Bentley Middle East and Africa (6E06),United Kingdom E01 Bentley UK (6E01),United States E05 Bentley USA and rest America (6E05) Bentley Topic Market area Brand Transaction 2069252/1 No. Level EH Status Approval Release date Event memory entries Diagnostic address 00CB - Rear axle steering 00CB - Rear axle steering 00CB - Rear axle steering 00CB - Rear axle steering Event memory entry Fault type Fault status B200096: Faulty control module static B200096: Faulty control module Intermittent P060700: Control Module Performance Intermittent P060700: Control Module Performance static New customer code Object of complaint Complaint type Position running gear -> adaptive suspension, pitch and roll compensation dimensional accuracy running gear -> steering system functionality Vehicle data Bentayga EWB - New Flying Spur and New Continental GT Speed Sales types Type 3S31EB 3S31EB ZG2* ZG2* ZG2* ZV1* MY 2022 2023 2021 2022 2023 2023 Brand Designation Engine code Gearbox code Final drive code E * * * E * * * E * * * E * * * E * * * E * * * Equipment combinations PR numbers with 0N5 Documents Document name master.xml INTERNAL Technical product information Warnings within the DIP for the rear steering system - DTC B200096 and/or P060700 evident within diagnostic address 00CB Transaction No.: 2069252/1 Customer statement / workshop findings Customer statement • Rear Steering Fault warning present within the DIP (Figure 1) Figure 1 Workshop findings: The following DTC’s could be evident within diagnostic address 00CB - Rear Axle Steering control module • DTC B200096 and/or P060700 • The rear wheels may also be tracking incorrectly Technical background In the event the symptom described with the Customer statement/workshop findings section is evident the operative should conduct the instructions within the Measure section WARNING Hybrid vehicles use a High voltage system and MUST only be worked on by suitably qualified personnel • Please ensure all guidelines within the repair manual are strictly followed before and whilst conducting any work on vehicles with a High voltage system Production change - Measure 1) Inspect the rear wheel steering control unit /J1019 (rear steering rack) for signs of the following: • Damage • Contamination • Excessive wear 2) Referring to the applicable wiring diagram, conduct an electrical integrity check for the rear wheel steering control unit /J1019 (rear steering rack) in particular the 2-way 12V plug and connector (see the example shown in Figure 1) for any signs of corrosion or water damage INTERNAL Figure 1 • Refer to the applicable wiring diagram - Check all applicable earth points of J1019 for Cleanliness, security and integrity - Rectify as applicable and retest to confirm if the DTC’s are still evident • If no faults were identified after conducting the wiring integrity checks the operative should confirm no faults were found and attach a current ODIS log to a new or existing DISS query • The operative must await feedback from the new or existing DISS query before conducting any further work NOTICE NOTICE FOR PRODUCT SUPPORT: On receipt of all requested information Product Support should second level the DISS query to the Chassis Senior Engineer and await feedback before requesting the rear wheel steering control unit /J1019 (rear steering rack) is replaced Warranty accounting instructions Warranty type - 110 or 910 Damage Service Number 48 69 Damage Code 00 40 Time to conduct the applicable wiring integrity checks Labour Operation Code 97 09 01 00 Time Must not exceed 40 TU INTERNAL