A4323682059665_4

Technical Service Bulletin
43 Warning light for the suspension control module
43 23 68 2059665/4 January 20, 2023. Supersedes Technical Service Bulletin Group 43 number 22-58 dated
June 9, 2022, for reasons listed below.
Model(s)
Year
A4, A4 allroad,
and Q7
2017 – 2023
S4, A5, A5
Cabriolet, A5
Sportback, S5,
S5 Cabriolet, S5
Sportback, Q5,
and SQ5
2018 – 2023
VIN Range
Vehicle-Specific Equipment
All
Not Applicable
2018 – 2019
RS 5
2021 – 2023
RS 5 Sportback
2019
2021 – 2023
Q8
2019 – 2023
SQ7, SQ8, and
RS Q8
2020 –
20203
Q5 e quattro, Q5
Sportback, and
SQ5 Sportback
2021 - 2023
Condition
REVISION HISTORY
Revision
Date
Purpose
4
-
Revised Service (Updated Step 3)
3
06/09/2022
Revised header (Added Models and model years)
Revised Service (Updated SVM table)
2
06/04/2021
Revised header (Added model year)
Revised Warranty (Added Claim Types)
Customer states:
Page 1 of 3
© 2023 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights
of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without
the prior expressed written permission of the publisher.
Technical Service Bulletin
• The warning light for the suspension comes on in the instrument cluster.
Workshop findings:
• When carrying out "Check control unit configuration", the software version management (SVM) registers an
unknown event. The suspension control module, J775 (address word 0074) can therefore not be automatically
parametrized.
Technical Background
Not applicable.
Production Solution
Not applicable.
Service
SVM Update Instructions
1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions.
2. Update the suspension control module, J775 (address word 0074) using the SVM action code as listed in the
table below, if necessary:
Model
New Software
Version (or higher)
New ZDC Version
SVM Code Input
A4 ,A5, Q5, Q7, Q8
1215
8W0909576VC
74A005
3. After the software update, proceed with a new “basic settings complete” process of the suspension control
module J775.
Warranty
Claim Type:
• 110 up to 48 Months/50,000 Miles.
• G10 for CPO Covered Vehicles – Verify Owner.
• If the vehicle is outside any warranty, this Technical Service Bulletin is informational
only.
Service Number:
4316
Damage Code:
0039
Page 2 of 3
© 2023 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights
of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without
the prior expressed written permission of the publisher.
Technical Service Bulletin
Labor Operations:
Software Update (Includes checking for DTCs)
0151 0000
Time stated on
the diagnostic
protocol (Max 40
TU)
Diagnostic Time:
GFF
No allowance
0 TU
Road test prior to the service procedure
No allowance
0 TU
Road test after the service procedure
0121 0004
10 TU
As per TSB 2059665/4
Claim Comment:
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Additional Information
The following Technical Service Bulletin(s) will be necessary to complete this procedure:
• TSB 2011732, 00 Software Version Management (SVM), operating instructions.
All part and service references provided in this TSB (2059665) are subject to change and/or removal. Always
check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the
Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2023 Audi of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Page 3 of 3
© 2023 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights
of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without
the prior expressed written permission of the publisher.