LI54.71-P-075704
Service Bulletin Details
Public Details for: LI54.71-P-075704
Complaint message in ic: "active brake assist function restricted". "active emergency stop assist inoperative" "active lane keeping assist inoperative" "active blind spot assist inoperative" note: the problem can occur after a softwa
Models from 2023
2023 MERCEDES-BENZ EQS450 |
Models from 2022
2022 MERCEDES-BENZ AMG EQS |
2022 MERCEDES-BENZ C300 |
2022 MERCEDES-BENZ EQS450 |
2022 MERCEDES-BENZ EQS580 |
2022 MERCEDES-BENZ S500 |
2022 MERCEDES-BENZ S580 |
2022 MERCEDES-MAYBACH S680 |
Models from 2021
2021 MERCEDES-BENZ AMG S63 |
2021 MERCEDES-BENZ S500 |
2021 MERCEDES-BENZ S560 |
2021 MERCEDES-BENZ S580 |
Instrument Cluster Message after SW update of IDC (N62/4): "Active Braking Emergency Stop and Lane Keeping Assist function restricted". Topic number LI54.71-P-075704 Version 1 Function group 54.71 - Camera and radar-assisted assistance systems Date 1/4/23 Validity Model series 206, model series 223 and model series 297 with code 233 Reason for change Remedy supplemented Complaint Message in IC: "Active Brake Assist function restricted". "Active Emergency Stop Assist inoperative" "Active Lane Keeping Assist inoperative" "Active Blind Spot Assist inoperative" Note: The problem can occur after a software update of control unit N62/4 - Driver assistance system A quick test may not show any relevant fault codes related to the IC messages. Cause In rare cases, it may be that no automatic SCN coding was performed after control unit N62/4- driver assistance system was programmed. Attachments File Description IDC223_Update_without_SCN.pdf IDC223 Update ohne SCN Codierung/Update w/o SCN coding Remedy Perform new SCN coding of control unit N62/4- driver assistance system. If control unit N62/4- driver assistance system cannot be diagnosed using XENTRY Diagnosis, then a voltage reset of control unit N62/4- driver assistance system must be carried out. Under some circumstances, this reset must be performed several times before the control unit responds again. 04.01.2023 14:49:26 © Copyright Mercedes-Benz AG TPEREVE Page 1 / 2 As soon as control unit N62/4- driver assistance system can be diagnosed again, there must be a new initial start up with subsequent SCN coding. Note: It is possible to check under the "IDC223" object in VeDoc under the "History" tab whether a software calibration number was also redocumented with the software update. Attachment shows an example of missing "Software calibration number". When correct a "Software calibration number" entry will be associated with IDC223. Attachments File Description IDC223_Update_with_SCN.pdf IDC223 Update mit SCN Codierung/Update with SCN coding Symptoms Communication/information > Assistance and warning systems > Brake Assist > Warning message in instrument cluster Communication/information > Assistance and warning systems > Brake Assist > Malfunction Operation numbers/damage codes Op. no. Operation text Time Damage code Note 54897G3 04.01.2023 14:49:26 © Copyright Mercedes-Benz AG TPEREVE Page 2 / 2