LI83.10-P-075602
Service Bulletin Details
Public Details for: LI83.10-P-075602
Complaint noise can be heard coming from the air conditioning system at higher blower motor speeds. Cause leaves/foreign objects have entered through the water drain grille in the water drain thereby causing an imbalance and noise in th
Noise From Fan Motor Topic number LI83.10-P-075602 Version 1 Function group 83.10 - Ventilation Date 11/29/22 Validity H243 left-hand drive vehicle, H247 left-hand drive vehicle Reason for change Complaint Noise can be heard coming from the air conditioning system at higher blower motor speeds. Cause Leaves/foreign objects have entered through the water drain grille in the water drain thereby causing an imbalance and noise in the blower wheel. Remedy Remove any leaves/foreign objects from the blower and interior air filter (the blower does NOT need to be replaced). After this, more fine-grained grilles and sealing frames can be used that are better at filtering out leaves / foreign objects. Parts required for retrofitting: Sealing frame (A 247 835 12 00) Sealing frame (A 247 835 11 00) Plug-in mounting (A 000 991 56 04) 10.01.2023 15:31:58 © Copyright Mercedes-Benz AG JKANTAR Page 1 / 12 Housing cover (A 247 830 95 03) Housing cover (A 247 830 63 03) Steps: 1- Remove windshield wiper as per the work instructions AR82.30-P-0001MFA 2- Remove cover for water drain as per the work instructionsAR83.10-P-1411MFB 3- Release threaded connections (5x 10 mm, 2x 8 mm) 10.01.2023 15:31:58 © Copyright Mercedes-Benz AG JKANTAR Page 2 / 12 10.01.2023 15:31:58 © Copyright Mercedes-Benz AG JKANTAR Page 3 / 12 4- Fasten released part temporarily using cable tie to hood. 5- Thoroughly clean body between fender and wiper motor then mount the sealing frame (A 247 835 12 00) using the self-adhesive tape. 6- Cut cable tie and insert plastic part again. Then thoroughly clean the area behind the mounted sealing frame. 10.01.2023 15:31:58 © Copyright Mercedes-Benz AG JKANTAR Page 4 / 12 7- Open plastic cap on firewall then vacuum the filter using a vacuum cleaner. Then tighten the threaded connections again. 8- Finally, insert sealing frame (A 247 835 11 00) and attach to body-in-white using plug-in mounting (A 000 991 56 04) 10.01.2023 15:31:58 © Copyright Mercedes-Benz AG JKANTAR Page 5 / 12 9- Assemble in reverse order. 10- Place housing cover (A 247 830 95 03) and housing cover (A 247 830 63 03) on top of each other. 10.01.2023 15:31:58 © Copyright Mercedes-Benz AG JKANTAR Page 6 / 12 10.01.2023 15:31:58 © Copyright Mercedes-Benz AG JKANTAR Page 7 / 12 Attachments File Description 1100.png 5.PNG 6.PNG 1200_.jpg 5604_.png 10.01.2023 15:31:58 © Copyright Mercedes-Benz AG JKANTAR Page 8 / 12 9503_.png 6303_.png 3_.PNG 10.01.2023 15:31:58 © Copyright Mercedes-Benz AG JKANTAR Page 9 / 12 4_.PNG 7_.PNG 10.01.2023 15:31:58 © Copyright Mercedes-Benz AG JKANTAR Page 10 / 12 8_.PNG 10.PNG Symptoms 10.01.2023 15:31:58 © Copyright Mercedes-Benz AG JKANTAR Page 11 / 12 Body > Air conditioning > Air conditioning > Noise Parts Part number ES1 ES2 Designation Quantity Note EPC A2478351100 SEALING FRAME 1 X A2478351200 SEALING FRAME 1 X A2478309503 HOUSING COVER 1 X A0009915604 CLIP FASTENER 1 X A2478306303 HOUSING COVER 1 X Operation numbers/damage codes Op. no. Operation text 10.01.2023 15:31:58 © Copyright Mercedes-Benz AG Time JKANTAR Damage code Note 8322136 Blower motor noise Page 12 / 12