22-NA-128
Service Bulletin Details
Public Details for: 22-NA-128
This technical bulletin provides a procedure to test the intake manifold for any possible leaks that may cause the customers concern.
- 2022 -
Models from 2022
Bulletin No.: Service Bulletin Date: 22-NA-128 January, 2023 TECHNICAL Subject: Malfunction Indicator Lamp (MIL) Illuminated - DTC P0172, P026D, P2459, and/or P2A00 Set Brand: Model: Cadillac Escalade Models Model Year: from to 2022 2022 VIN: from to Engine: Transmission: Silverado LTD (RPO J21, VIN Digit 5 = W/Y) Chevrolet Silverado New (RPO J22, VIN Digit 5 = A/D) Suburban Tahoe LM2 Sierra Limited (RPO J21, VIN Digit 5 = 8/9) GMC Sierra New (RPO J22, VIN Digit 5 = H/U) Yukon Models Involved Region or Country North America, Europe, Uzbekistan, Russia, Middle East, Israel, Palestine, Argentina (Mercosur), Bolivia (West), Chile (West), Colombia (West), Ecuador (West), Paraguay (West), Peru (West), Uruguay (West), Japan, Cadillac Korea (South Korea), Thailand (ASEAN), Australia/New Zealand Condition Some customers may comment that the MIL is illuminated. Some technicians may find one or more of the following DTCs set in the Engine Control Module (ECM): • P0172: Fuel Trim System Rich • P026D: Fuel Injection Quantity Too High • P2459: Particulate Filter Regeneration Frequency • P2A00: Heated Oxygen Sensor Performance Copyright 2023 General Motors LLC. All Rights Reserved. Page 2 January, 2023 Bulletin No.: 22-NA-128 Cause 6102369 This condition may be caused by a leak at the intake manifold. Correction The technician can find this leak by testing using the Component/System Leak Test in SI or bulletin PIP5684. If a leak is found in the intake manifold, replace the intake manifold. Important: Service agents must comply with all International, Federal, State, Provincial, and/or Local laws applicable to the activities it performs under this bulletin, including but not limited to handling, deploying, preparing, classifying, packaging, marking, labeling, and shipping dangerous goods. In the event of a conflict between the procedures set forth in this bulletin and the laws that apply to your dealership, you must follow those applicable laws. Service Procedure Refer to Intake Manifold Replacement in SI. Labor Operation 40887358* Parts Information Causal Part Description Part Number Qty X MANIFOLD, INT 55511544 1 Warranty Information For vehicles repaired under the Emission coverage, use the following labor operation. Reference the Applicable Warranties section of Investigate Vehicle History (IVH) for coverage information. Description Labor Time Replace Intake Manifold for DTC P0172, P026D, P2459, and/ or P2A00 6.3 hr (SUV) *This is a unique Labor Operation for Bulletin use only. 6.7 hr (P/U) Bulletin No.: 22-NA-128 January, 2023 Version 1 Modified Released January 19, 2023 GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the information. Page 3 WE SUPPORT VOLUNTARY TECHNICIAN CERTIFICATION