23-NA-006

Bulletin No.:
Service Bulletin
Date:
23-NA-006
February, 2023
TECHNICAL
Subject:
Brand:
Chevrolet
GMC
Instrument Panel Trim Plate Applique Loose
Model:
Model Year:
from
to
2021
2023
VIN:
from
to
Engine:
Transmission:
Suburban
Tahoe
Yukon Models
Involved Region or Country
North America
Condition
Some customers may comment on the instrument panel trim plate applique is either
loose and/or has fallen off.
Cause
The cause of the condition may be due to the retention clip coming unsecured.
Correction
Apply foam tape to the tower holding the retention clips and reinstall.
Service Procedure
Important: Service agents must comply with all
International, Federal, State, Provincial, and/or
Local laws applicable to the activities it performs
under this bulletin, including but not limited to
handling, deploying, preparing, classifying,
packaging, marking, labeling, and shipping
dangerous goods. In the event of a conflict between
the procedures set forth in this bulletin and the
laws that apply to your dealership, you must follow
those applicable laws.
6258561
If you encounter a vehicle with the above concern,
remove the instrument panel trim plate applique and
apply Kent foam tape (or equivalent) to the bottom of
the part on the side ribs of the tower holding the clip like
illustrated above. Refer to Instrument Panel Trim Plate
Applique Replacement - Left or Right Side.
Once the reinstalled, verify condition is corrected.
6258556
Copyright 2023 General Motors LLC. All Rights Reserved.
Page 2
February, 2023
Bulletin No.: 23-NA-006
Parts Information
Contact Kent Automotive at 1-888-YES-KENT or online
at www.kent-automotive.com.
Causal
Part
Description
Part
Number
Qty
N/A
Adhesive
Foam Tape*
83327
1
* We believe this source and their products to be reliable.
There may be additional manufacturers of such products/
materials. General Motors does not endorse, indicate any
preference for, or assume any responsibility for the products
or material from this firm or for any such items that may be
available from other sources.
Warranty Information
For vehicles repaired under the Bumper-to-Bumper
coverage (Canada Base Warranty coverage), use the
following labor operation. Reference the Applicable
Warranties section of Investigate Vehicle History (IVH)
for coverage information.
Labor Operation
Description
Labor Time
1086608*
Tape Application to Instrument Panel Trim Plate Applique
0.3 hr
*This is a unique Labor Operation for Bulletin use only.
Version
1
Modified
Released February 01, 2023
GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these
technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper
service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a
job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your
vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the
information.
WE SUPPORT VOLUNTARY
TECHNICIAN
CERTIFICATION