23-NA-007
Service Bulletin Details
Public Details for: 23-NA-007
This technical bulletin provides repair information to correct a customer concern of black radio display screen (triangle and camera with slash through it) with dtcs B1A62 82 and 86 setting current in video processing module (vpm).
Models from 2023
2023 CADILLAC ESCALADE |
2023 CADILLAC ESCALADE ESV |
2023 CHEVROLET SUBURBAN |
2023 CHEVROLET TAHOE |
2023 GMC YUKON |
2023 GMC YUKON XL |
Models from 2022
2022 CADILLAC ESCALADE |
2022 CADILLAC ESCALADE ESV |
2022 CHEVROLET SUBURBAN |
2022 CHEVROLET SUBURBAN 1500 |
2022 CHEVROLET TAHOE |
2022 GMC YUKON |
2022 GMC YUKON XL |
Models from 2021
2021 CADILLAC ESCALADE |
2021 CADILLAC ESCALADE ESV |
2021 CHEVROLET SUBURBAN |
2021 CHEVROLET SUBURBAN 1500 |
2021 CHEVROLET TAHOE |
2021 GMC YUKON |
2021 GMC YUKON XL |
Bulletin No.: Service Bulletin Date: 23-NA-007 February, 2023 TECHNICAL Subject: Brand: Cadillac Chevrolet GMC Black Radio Display Screen (Triangle and Camera with Slash Through it) with DTCs B1A62 82 and 86 Setting Current in Video Processing Module (VPM) Model: Model Year: from to 2021 2023 VIN: from Engine: Transmission: to Escalade Escalade ESV Tahoe Suburban Yukon Yukon XL Involved Region or Country United States, Canada, Mexico, Russia, Middle East, Japan, Cadillac Korea (South Korea) Additional Options (RPOs) Condition Copyright 2023 General Motors LLC. All Rights Reserved. Some customers may comment on a condition present on startup on the radio display where a black screen with a triangle and a camera with the slash through it is displayed. Page 2 February, 2023 Bulletin No.: 23-NA-007 6259342 Technician may find two DTCs set current or in recent history: • DTC B1A62 82 • DTC B1A62 86 Cause The cause of the condition may be software anomalies in the VPM. Correction Reprogram the VPM with the latest software released. Service Procedure Important: Service agents must comply with all International, Federal, State, Provincial, and/or Local laws applicable to the activities it performs under this bulletin, including but not limited to handling, deploying, preparing, classifying, packaging, marking, labeling, and shipping dangerous goods. In the event of a conflict between the procedures set forth in this bulletin and the laws that apply to your dealership, you must follow those applicable laws. Caution: Before downloading the update files, be sure the computer is connected to the internet through a network cable (hardwired). DO NOT DOWNLOAD or install the files wirelessly. If there is an interruption during programming, programming failure or control module damage may occur. • • • Ensure the programming tool is equipped with the latest software and is securely connected to the data link connector. If there is an interruption during programming, programming failure or control module damage may occur. Stable battery voltage is critical during programming. Any fluctuation, spiking, over voltage or loss of voltage will interrupt programming. Install a GM Authorized Programming Support Tool to maintain system voltage. Refer to www.gmdesolutions.com for further information. If not available, connect a fully charged 12 V jumper or booster pack disconnected from the AC voltage supply. DO NOT connect a battery charger. Follow the on-screen prompts regarding ignition power mode, but ensure that anything that drains excessive power (exterior lights, HVAC blower motor, etc) is off. Bulletin No.: 23-NA-007 • February, 2023 Clear DTCs after programming is complete. Clearing powertrain DTCs will set the Inspection/ Maintenance (I/M) system status indicators to NO. Important: The service technician always needs to verify that the VIN displayed in the TLC left side drop down menu and the top center window match the VIN plate of the vehicle to be programmed prior to using Service Programming System 2 (SPS2) for programming or reprogramming a module. • For the TLC application, service technicians need to always ensure that the power mode (ignition) is “ON” before reading the VIN from the vehicle’s VIN master module and that they do not select a VIN that is already in the TLC application memory from a previous vehicle. • If the VIN that shows up in the TLC top center window after correctly reading the VIN from the vehicle does not match the VIN plate of the vehicle, manually type in the VIN characters from the vehicle VIN plate into the TLC top center window and use these for programming or reprogramming the subject module with the correct vehicle VIN and software and/or calibrations. • The Engine Control Module (ECM) is the master module (for VIP vehicles) that TLC reads to determine the VIN of the vehicle. If the VIN read from the vehicle by TLC does not match the VIN plate of the vehicle, the ECM also needs to be reprogrammed with the correct VIN, software and calibrations that match the vehicle’s VIN plate. • The Body Control Module (BCM) is the master module (for GEM vehicles) that TLC reads to determine the VIN of the vehicle. If the VIN read from the vehicle by TLC does not match the VIN plate of the vehicle, the BCM also needs to be reprogrammed with the correct VIN, software and calibrations that match the vehicle’s VIN plate. Caution: Be sure the VIN selected in the drop down menu (1) is the same as the vehicle connected (2) before beginning programming. Page 3 Page 4 February, 2023 Bulletin No.: 23-NA-007 5743643 Important: If the vehicle VIN DOES NOT match, the message below will be shown 5877000 Bulletin No.: 23-NA-007 February, 2023 Page 5 5644477 Important: Techline Connect screens shown above. Important: If the same calibration/software warning is noted on the TLC Summary screen, select OK and follow screen instructions. After a successful programming event, the WCC is located in the Service Programming System dialogue box of the SPS Summary screen. No further action is required. Refer to the Warranty section of the bulletin. 1. Reprogram the Video Processing Module. Refer to K157 Video Processing Control Module: Programming and Setup in SI. Page 6 February, 2023 Bulletin No.: 23-NA-007 5644478 Note: The screenshot above is an example of module programming and may not be indicative of the specific module that is being programmed. Module selection and VIN information have been blacked out. Important: To avoid warranty transaction rejections, you MUST record the warranty claim code provided on the Warranty Claim Code (WCC) screen shown above on the job card. Refer to callout 1 above for the location of the WCC on the screen. 2. Record SPS Warranty Claim Code on job card for warranty transaction submission. Warranty Information For vehicles repaired under the Bumper-to-Bumper coverage (Canada Base Warranty coverage), use the following labor operation. Reference the Applicable Warranties section of Investigate Vehicle History (IVH) for coverage information. Labor Operation Description Labor Time *2889198 Video Processing Module Reprogram with SPS for Black Radio Display Screen 0.9 hr *This is a unique Labor Operation for Bulletin use only. Important: **To avoid warranty transaction rejections, carefully read and follow the instructions below: Bulletin No.: 23-NA-007 February, 2023 Labor Operation Description Page 7 Labor Time 6125814 • • The Warranty Claim Code must be accurately entered in the “Warranty Claim Code” field of the transaction. When more than one Warranty Claim Code is generated for a programming event, it is required to document all Warranty Claim Codes in the “Correction” field on the job card. Dealers must also enter one of the codes in the “Warranty Claim Code” field of the transaction, otherwise the transaction will reject. It is best practice to enter the FINAL code provided by SPS2. Warranty Claim Code Information Retrieval 6125774 Page 8 February, 2023 Bulletin No.: 23-NA-007 If the Warranty Claim Code was not recorded on the Job Card, the code can be retrieved in the SPS2 system as follows: 1. Open TLC on the computer used to program the vehicle. 2. Select and start SPS2. 3. Select Settings (1). 4. Select the Warranty Claim Code tab (2). The VIN, Warranty Claim Code and Date/Time will be listed on a roster of recent programming events. If the code is retrievable, dealers should resubmit the transaction making sure to include the code in the SPS Warranty Claim Code field. Version 1 Modified Released February 01, 2023 GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the information. WE SUPPORT VOLUNTARY TECHNICIAN CERTIFICATION