A0123452066257_2

Service Bulletin Details

Public Details for: A0123452066257_2

This bulletin provides information on a software update for when the mil light is on accompanied by one of the following dtcs: P013E00, P013F00, P014A00, or P014B00.


- 2023 - 2022 - 2021 - 2020 - 2019 - 2018 -

Models from 2023
2023 AUDI RS5
Models from 2022
2022 AUDI RS5
Models from 2021
2021 AUDI RS5
Models from 2020
2020 AUDI RS5
Models from 2019
2019 AUDI RS5
Models from 2018
2018 AUDI RS5
Technical Service Bulletin
01 MIL on, DTC P013E00, P013F00, P014A00 or P014B00 stored in ECM - V6 2.9 TFSI
01 23 45 2066257/2 February 15, 2023. Supersedes Technical Service Bulletin Group 01 number 22-17 dated
March 2, 2022, for reasons listed below.
Model(s)
Year
RS 5
2018 – 2023
RS 5 Sportback
2019 – 2023
VIN Range
Vehicle-Specific Equipment
All
Not Applicable
Condition
REVISION HISTORY
Revision
Date
Purpose
2
-
Revised Service (changed SVM Code)
1
03/03/2022
Initial publication
Customer statement:
MIL is on.
Please note: This TSB only applies to vehicles with a mileage of < 3,000 miles.
Workshop findings:
One of the following DTCs (intermittent/static) is stored in the engine control module (ECM), J623 (address word
0001):
• P013E00: O2 Sensor Bank 1 Sensor 2 Delayed Response - Rich to Lean
• P013F00: O2 Sensor Bank 1 Sensor 2 Delayed Response - Lean to Rich
• P014A00: O2 Sensor Bank 2 Sensor 2 Delayed Response - Rich to Lean
• P014B00: O2 Sensor Bank 2 Sensor 2 Delayed Response - Lean to Rich
Technical Background
This DTC is stored without good reason due to a software issue regarding Oxygen sensor diagnosis on new
catalytic converter systems.
Production Solution
New software implemented in production CW 41/21.
Page 1 of 3
© 2023 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights
of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without
the prior expressed written permission of the publisher.
Technical Service Bulletin
Service
1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions.
2. Update the engine control module (ECM) -J623- (address word 0001) using the SVM action code as listed in
the table below, if necessary:
Model
RS5 Coupe/
Sportsback
Engine
DECA
Old Software
Part Number
8W0.907.551.D
Old
Software
Version
New Software
Part Number
New Software SVM Code
Version
Input
(or higher)
(or higher)
0001 - 0003 8W0.907.551.D
0004
01A234
Warranty
Claim Type:
• 110 up to 48 Months/50,000 Miles.
• G10 for CPO – Verify owner.
• If the vehicle is outside of any warranty, this Technical Service Bulletin is
informational only.
Service Number:
2470
Damage Code:
0039
Labor Operations:
Software Update (Includes checking for
DTCs)
0151 0000
Time stated on
the diagnostic
protocol (Max
50 TU)
Diagnostic Time:
GFF (Included in software update)
No allowance
0 TU
Road test prior to the service procedure
No allowance
0 TU
Road test after the service procedure
No allowance
0 TU
As per TSB 2066257/2
Claim Comment:
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Required Parts and Tools
Page 2 of 3
© 2023 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights
of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without
the prior expressed written permission of the publisher.
Technical Service Bulletin
Tool Number
Tool Description
VAS 6160/VAS 6150
VAS tester with the current version of ODIS
(Windows 10).
Additional Information
All part and service references provided in this TSB (2066257) are subject to change and/or removal. Always
check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the
Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2023 Audi of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Page 3 of 3
© 2023 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights
of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without
the prior expressed written permission of the publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.