LI72.10-P-075291

Surface-Flush Door Handle Does Not Retract When Vehicle Locked
Topic number
LI72.10-P-075291
Version
2
Function group
72.10 - Front door
Date
2/13/23
Validity
MODEL 223 with code 889 up to manufacturing date 2
July 2022.
MODEL 295 with code 889 up to manufacturing date 2
July 2022.
MODEL 296 with code 889 up to manufacturing date 2
July 2022.
MODEL 297 with code 889 up to manufacturing date 2
July 2022.
Reason for change
Validity adapted: Model series X296 added; Cause adapted: Fault code B185E96 amended
Complaint
The surface-flush door handle sometimes does not retract when the vehicle is locked.
It is only after repeated locking operation that the problematic door handle retracts.
Cause
Motor fault detection (FC B185E96 or B185D96) is triggered in the bearing bracket electronics of the surface-flush
door handle (A17/x) during the retracting movement and an adjustment for this cycle is prevented.
Remedy
Replace bearing bracket of surface-flush door handle on problematic door.
WIS-References
Document number
Title
AR72.10-P-4012S
Remove/install front door handle bea- Model 223 except code Z07 (B7 arring bracket
moring for special protection version)
AR72.12-P-4012S
Remove/install door handle bearing
bracket of rear door
AR72.10-P-4012EQS
Remove/install front door handle bea- Model 295, 296, 297
ring bracket
AR72.12-P-4012EQS
Remove/install door handle bearing
bracket of rear door
13.02.2023 15:27:38
© Copyright Mercedes-Benz AG
Note
RROWELL
Model 223 except code Z07 (B7 armoring for special protection version)
Model 295, 296, 297
Page 1 / 2
Symptoms
Body > Door/Flap > Door > Door handle > Jammed
Operation numbers/damage codes
Op. no.
Operation text
Time
Damage
code
Note
80A0D73
80N0D73
80A0E73
80N0E73
13.02.2023 15:27:38
© Copyright Mercedes-Benz AG
RROWELL
Page 2 / 2