2069484.2
Service Bulletin Details
Public Details for: 2069484.2
- 2023 -
Technical product information Exhaust Flap - DTC's evident - P048D - P048B - P04A8 - P04A0 evident - V8 Kovomo Russische Föderation (5RU),Australia E04 Bentley rest Asia and Australia (6E04),China 796 VW Import Comp. Ltd (Vico), Beijing (6796),Germany E02 Bentley rest Europe (6E02),Japan E03 Bentley Japan (6E03),Korea, (South) E08 Bentley South Korea (6E08),United Arab Emirates E06 Bentley Middle East and Africa (6E06),United Kingdom E01 Bentley UK (6E01),United States E05 Bentley USA and rest America (6E05) Bentley Topic Market area Brand Transaction 2069484/2 No. Level EH Status Approval Release date New customer code Object of complaint whole vehicle -> vehicle areas -> rear-end information, navigation, communication, entertainment -> symbolic fault indicators -> emission control system fault indicator whole vehicle -> vehicle areas -> rear-end Vehicle data New Continental GT/C and New Flying Spur V8 Kovomo Sales types Type MY Brand Designation Engine code Gearbox code Final drive code 3S32CB 3S34CB 3S42CB ZG22CB ZG24CB 2023 2023 2023 2023 2023 E E E E E Documents Document name master.xml INTERNAL * * * * * * * * * * * * * * * Complaint type noise, vibration -> noise functionality -> activates noise, vibration -> too loud Position > not specified < > not specified < Technical product information Exhaust Flap - DTC's evident - P048D - P048B - P04A8 - P04A0 evident - V8 Kovomo Transaction No.: 2069484/2 Customer statement / workshop findings Customer statement • Engine warning lamp is illuminated within the Driver Instrument Panel (DIP) Workshop findings One or more of the following Diagnostic Trouble Codes (DTC’s) are stored within Engine Control Module NOTICE NOTE: The DTC’s and symptom codes must match the following DTC information Bank1 P048D Exhaust Pressure Control Valve "A" Position Sensor/Switch Circuit Low Symptom code 34197 P048B Exhaust Pressure Control Valve "A" Position Sensor/Switch Circuit/Open Symptom code 34198 Bank 2 P04A8 Exhaust Pressure Control Valve "B" Position Sensor/Switch Circuit Low Symptom code 34224 P04A0 Exhaust Pressure Control Valve "B" Range/Performance Symptom code 34225 P04A800: Exhaust flap 2 sensor Short circuit to Ground (GND) passive/sporadic 34224 Technical background In the event the symptoms are as described within the Customer statement/Workshop findings section the operative should refer to the Measure section of this TPI Production change - Measure Check to confirm if the actual VIN is applicable for SC23/09, if applicable please conduct SC23/09 However In the event the VIN is not applicable – The operative must Refer to the applicable wiring diagram and conduct a wiring integrity check of the relative exhaust flap control unit wiring harness and connector contacts Should the exhaust flap control unit(s) be diagnosed as faulty raise a Technical DISS query to request permission to replace the applicable control unit(s) and await feedback before conducting any further work, once permission has been given via the open DISS query please replace the applicable part as per the applicable Rep.Gr instructions NOTICE NOTE: Do not conduct a road test to confirm if the issue is resolved the operative should use the rotary control switch and change the mode to ‘Sport’ and then retest TIP: Ensure the vehicle is parked in a well ventilated area Warranty accounting instructions Warranty type 110 or 910 Damage service number 26 71 Damage code 00 40 Wiring integrity check Labour Operation 97 09 01 00 Time - As per ODIS log must not exceed 20 TU’s Time to remove and refit (x1) exhaust silencer (all models) Labour operation code 26 33 19 00 Time 80 TU’s INTERNAL Time to remove and refit (x2) exhaust silencers (all models) Labour operation code 26 33 20 00 Time 140 TU’s Time to remove and refit the exhaust flap control unit (x1) New Continental GT/C Labour operation code 26 71 19 50 Time 10 TU Time to remove and refit the exhaust flap control unit (x2) New Continental GT/C Labour operation code 26 71 20 50 Time 20 TU Time to remove and refit the exhaust flap control unit (x1) New Flying Spur Labour operation code 26 71 19 00 Time 20 TU Time to remove and refit the exhaust flap control unit (x2) New Flying Spur Labour operation code 26 71 20 00 Time 30 TU NOTICE Warranty claims for a road test will not be approved Parts information Refer to the ETKA parts catalogue INTERNAL