T-TT-0729-23

Tech Tip T-TT-0729-23
Subject
March 30, 2023
Market
Rear Bumper Gap Difference - Measurement Tip
Service Category
Section
Vehicle Exterior
Exterior Panels/Trim
USA
Applicability
2022 - Present - Tundra & Tundra Hybrid
APPLICABLE VEHICLES
2022-2023
Tundra
CONDITION
Some customers may share a concern of the rear bumper ends/pillar garnish not being evenly aligned
in comparison to center part of the bumper see figure 1 below for reference.
Fig. 1
RECOMMENDATIONS
1. Use a millimeter (mm) scale to measure down from bumper styling line (see circle 1 below). Gap
measurement should be taken at 50mm – 70mm below styling line. (See figure 2).
2. Submit a Dealership Product Report (DPR) with actual measurements prior to adjustments from both RH and
LH side (see figure 3).
3. Recommended measurements = RH/LH gap 15mm +/- 5mm, Side to Side Difference: ≤ 7mm
Figure 2
Figure 3
LINK REFERENCES
Expires on
Ver. 5.0 01/01/2023 T
09/30/2023
© 2023, Toyota Motor Sales, USA
Page 1 of 2
Tech Tip T-TT-0729-23
March 30, 2023
Subject
Market
Rear Bumper Gap Difference - Measurement Tip
USA
Applicability
1.
2.
3.
4.
5.
EXTERIOR PANELS / TRIM: REAR BUMPER: REMOVAL; 2022 MY Tundra Tundra HV
[11/2021 - 05/2022]
EXTERIOR PANELS / TRIM: REAR BUMPER: REMOVAL; 2022 - 2023 MY Tundra Tundra HV
[05/2022 - ???????]
EXTERIOR PANELS / TRIM: REAR BUMPER: DISASSEMBLY; 2022 - 2023 MY Tundra
Tundra HV [11/2021 - ???????]
EXTERIOR PANELS / TRIM: REAR BUMPER: REASSEMBLY; 2022 - 2023 MY Tundra
Tundra HV [11/2021 - ???????]
EXTERIOR PANELS / TRIM: REAR BUMPER: INSTALLATION; 2022 - 2023 MY Tundra
Tundra HV [11/2021 - ???????]
Expires on
Ver. 5.0 01/01/2023 T
09/30/2023
© 2023, Toyota Motor Sales, USA
Page 2 of 2