No. 37-23

Service
Technical Information
37/23
ENU
WPD0
1
WPD0 – Replacing Engine Mounts at the Left and Right (Stop Delivery)
Model Line:
Panamera (971)
Model Year:
2023
Concerns:
Left and right engine mount
Cause:
There is a possibility that the engine mount on the left and right on the affected vehicles was not
manufactured according to specifications.
This can result in loosening of the screw connection on the engine mounts while driving. This can result in
noises and vibrations in the engine compartment area.
Action:
Replacing the left and right engine mountss
Affected
Vehicles:
Only vehicles assigned to the campaign (see also PCSS Vehicle Information).
Required tools
Tool:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
9900 - PIWIS Tester 3/4
Battery charger with a current rating of at least 90 A, e.g. VAS 5908 Battery charger 90A
VAS 6832 - Master Gear unit elevating platform
VAS 6832/7 - Assembly fixture - Panamera G2
9229/1 - 9229/1 - Puller hook
T10439 - T10439 - Assembly pin
VAS 6931 - Transmission and gearbox jack
VAS 6926 - Puller set
T10187 - T10187 - Press-out tool
VW552 - VW552 - Spring compressor
T40093/50 - T40093/50 - Base
T40093/3P - T40093/3P - Support
T40091/50-51 - T40091/50-51 - Support
T40091/1 - T40091/1 - Pipe
T40091/3 - T40091/3 - Joiner
10-222A/2 - 10-222A/2 - Additional hook
3033 - 3033 - Lifting tackle
VAS 6942 - Torque– torque angle –key, 20-400 Nm (14-295 ftlb.)
V.A.G 1332A - Torque wrench, 40-200 Nm (30-148 ftlb.)
AfterSales
Apr 27, 2023
Page 1 of 7
1
Service
WPD0
ENU
Technical Information
37/23
Required parts
Required parts: The parts required depending on the respective campaign scope are covered in the “Warranty
processing” section.
In the “Parts” table view in PCSS, the required parts for each scope are marked with the designation
“Scope” and the respective number of the scope in the column Supplement.
Replacing the left and right engine mountss
Work Procedure: 1
2
For replacing the left and right engine mount. see  Workshop Manual 'Removing and installing
engine mounts (V6 Turbo)'
Enter campaign in the Warranty and Maintenance booklet.
Warranty processing
Scope 1:
Replacing the left and right engine mounts
Panamera (Basic)
Labor time:
Removing and installing engine mount
Includes:
Removing and installing wheels
Removing and installing the front axle carrier
Measuring vehicle front and rear
Adjusting vehicle at front/rear
Labor time: 538 TU
Required parts:
Apr 27, 2023
Page 2 of 7
V04015004AJ
 Engine mount
2 pieces
N 10687201
 Cheese head bolt with multiple-tooth head
(instrument cluster)
4 pieces
N 10261311
 Nut on spring strut
6 pieces
PAF104029
 Hexagon collar nut on spring strut
2 pieces
N 10628301
 Hexagon-head bolt on spring strut
2 pieces
N 10625901
 Collared cheese head bolt with multiple-tooth
head on engine support
1 piece
WHT008539
 Hexagon-head bolt with multiple-tooth head on
strut
3 pieces
N 91157202
 Collared cheese head bolt with multiple-tooth
head on strut
2 pieces
AfterSales
Service
Technical Information
37/23
ENU
N 10780501
 Collared cheese head bolt with multiple-tooth
head on top engine mount
3 pieces
WHT004955A
 Inner hexalobular socket cheese head bolt on
universal joint
1 piece
N 91244301
 Hexagon-head bolt with hexagon socket head on
front axle carrier
8 pieces
PAF911489
 Hexagon-head bolt with hexagon socket head on
engine mount
2 pieces
N 91260401
 Hexagon-head bolt on front axle carrier
2 pieces
N 91244301
 Hexagon-head bolt with hexagon socket head on
engine compartment strut
2 pieces
N 10629602
 Hexagon-head bolt on front axle carrier
4 pieces
PAF005633
 Double-hex collar nut on transverse control arm
2 pieces
WHT005819
 Hexagon collar nut on control arm
2 pieces
9A700499500
 Hexagon nut on tie rod
2 pieces
N 0150818
 Hexagon collar nut on anti-roll bar
2 pieces
N 10793603
 Hexagon-head bolt on anti-roll bar
2 pieces
N 0150818
 Hexagon collar nut
2 pieces
N 10793603
 Hexagon collar nut
2 pieces
N 10456004
 Screws for brake disc
4 pieces
WPD0
1
Additional required parts – Vehicle-specific/equipment-specific:
Vehicles with M-no. 1LQ, 1LX, 0J3, 0J5
PAF004572
 Cheese head bolt on fixed calliper
4 pieces
Additional required parts – Vehicle-specific/equipment-specific:
Vehicles with M-no. 0J2
PAF004571
 Cheese head bolt on fixed calliper
4 pieces
Required materials:
00004330516
 Coolant additive
0.2 piece
 Damage code WPD0 066 000 2
Warranty processing
Scope 1:
Not relevant for this vehicle type.
AfterSales
Apr 27, 2023
Page 3 of 7
1
Service
WPD0
Scope 2:
ENU
Technical Information
37/23
Replacing the left and right engine mounts
Panamera (4)
Labor time:
Removing and installing engine mount
Includes:
Removing and installing wheels
Removing and installing the front axle carrier
Replacing sealing ring for all-wheel drive flanged shaft
Draining and filling air spring
Remove and install front drive shaft
Measuring vehicle front and rear
Adjusting vehicle at front/rear
Labor time: 887 TU
Required parts:
Apr 27, 2023
Page 4 of 7
V04015004AJ
 Engine mount
2 pieces
N 10687201
 Cheese head bolt with multiple-tooth head
(instrument cluster)
4 pieces
N 10261311
 Nut on spring strut
6 pieces
PAF104029
 Hexagon collar nut on spring strut
2 pieces
N 10628301
 Hexagon-head bolt on spring strut
2 pieces
N 10625901
 Collared cheese head bolt with multiple-tooth
head on engine support
1 piece
WHT008539
 Hexagon-head bolt with multiple-tooth head on
strut
3 pieces
N 91157202
 Collared cheese head bolt with multiple-tooth
head on strut
2 pieces
N 10780501
 Collared cheese head bolt with multiple-tooth
head on top engine mount
3 pieces
WHT004955A
 Inner hexalobular socket cheese head bolt on
universal joint
1 piece
N 91244301
 Hexagon-head bolt with hexagon socket head on
front axle carrier
8 pieces
PAF911489
 Hexagon-head bolt with hexagon socket head on
engine mount
2 pieces
N 91260401
 Hexagon-head bolt on front axle carrier
2 pieces
N 91244301
 Hexagon-head bolt with hexagon socket head on
engine compartment strut
2 pieces
N 10629602
 Hexagon-head bolt on front axle carrier
4 pieces
PAF005633
 Double-hex collar nut on transverse control arm
2 pieces
AfterSales
Service
Technical Information
37/23
ENU
WHT005819
 Hexagon collar nut on control arm
2 pieces
9A700499500
 Hexagon nut on tie rod
2 pieces
N 0150818
 Hexagon collar nut on anti-roll bar
2 pieces
N 10793603
 Hexagon-head bolt on anti-roll bar
2 pieces
N 10456004
 Screws for brake disc
4 pieces
WHT007021
 Nut on drive shaft
2 pieces
298407475A
 Protective ring on drive shaft
1 piece
012409413
 Circlip on drive shaft
1 piece
9A740939910
 Shaft seal
1 piece
N 0150818
 Hexagon collar nut
2 pieces
N 10793603
 Hexagon collar nut
2 pieces
WPD0
1
Additional required parts – Vehicle-specific/equipment-specific:
Vehicles with M-no. 1LQ, 1LX, 0J3, 0J5
PAF004572
 Cheese head bolt on fixed calliper
4 pieces
Additional required parts – Vehicle-specific/equipment-specific:
Vehicles with M-no. 0J2
PAF004571
 Cheese head bolt on fixed calliper
4 pieces
Additional required parts – Vehicle-specific/equipment-specific:
Vehicles with M-no. A8F, A8H
0004321044
 Transmission oil
0.1 piece
Required materials:
00004330516
 Coolant additive
0.2 piece
00004330508
 Optimoly (drive shaft)
0.1 piece
 Damage code WPD0 066 000 2
Warranty processing
Scope 1-2:
Not relevant for this vehicle type.
Scope 3:
Replacing the left and right engine mounts
Panamera (PHEV)
AfterSales
Apr 27, 2023
Page 5 of 7
1
Service
WPD0
ENU
Technical Information
37/23
Labor time:
Removing and installing engine mount
Includes:
Removing and installing wheels
Removing and installing the front axle carrier
Replacing sealing ring for all-wheel drive flanged shaft
Draining and filling air spring
Remove and install front drive shaft
Measuring vehicle front and rear
Adjusting vehicle at front/rear
Labor time: 1120 TU
Required parts:
Apr 27, 2023
Page 6 of 7
V04015004AJ
 Engine mount
2 pieces
N 10687201
 Cheese head bolt with multiple-tooth head
(instrument cluster)
4 pieces
N 10261311
 Nut on spring strut
6 pieces
PAF104029
 Hexagon collar nut on spring strut
2 pieces
N 10628301
 Hexagon-head bolt on spring strut
2 pieces
N 10625901
 Collared cheese head bolt with multiple-tooth
head on engine support
1 piece
WHT008539
 Hexagon-head bolt with multiple-tooth head on
strut
3 pieces
N 91157202
 Collared cheese head bolt with multiple-tooth
head on strut
2 pieces
N 10780501
 Collared cheese head bolt with multiple-tooth
head on top engine mount
3 pieces
WHT004955A
 Inner hexalobular socket cheese head bolt on
universal joint
1 piece
N 91244301
 Hexagon-head bolt with hexagon socket head on
front axle carrier
8 pieces
PAF911489
 Hexagon-head bolt with hexagon socket head on
engine mount
2 pieces
N 91260401
 Hexagon-head bolt on front axle carrier
2 pieces
N 91244301
 Hexagon-head bolt with hexagon socket head on
engine compartment strut
2 pieces
N 10629602
 Hexagon-head bolt on front axle carrier
4 pieces
PAF005633
 Double-hex collar nut on transverse control arm
2 pieces
WHT005819
 Hexagon collar nut on control arm
2 pieces
AfterSales
Service
Technical Information
37/23
ENU
9A700499500
 Hexagon nut on tie rod
2 pieces
N 0150818
 Hexagon collar nut on anti-roll bar
2 pieces
N 10793603
 Hexagon-head bolt on anti-roll bar
2 pieces
N 10456004
 Screws for brake disc
4 pieces
WHT007021
 Nut on drive shaft
2 pieces
298407475A
 Protective ring on drive shaft
1 piece
012409413
 Circlip on drive shaft
1 piece
9A740939910
 Shaft seal
1 piece
N 0150818
 Hexagon collar nut
2 pieces
N 10793603
 Hexagon collar nut
2 pieces
WPD0
1
Additional required parts – Vehicle-specific/equipment-specific:
Vehicles with M-no. 1LQ, 1LX, 0J3, 0J5
PAF004572
4 pieces
 Cheese head bolt on fixed calliper
Additional required parts – Vehicle-specific/equipment-specific:
Vehicles with M-no. 0J2
PAF004571
4 pieces
 Cheese head bolt on fixed calliper
Additional required parts – Vehicle-specific/equipment-specific:
Vehicles with M-no. A8F, A8H
0004321044
 Transmission oil
0.1 piece
Required materials:
00004330516
 Coolant additive
0.2 piece
00004330508
 Optimoly (drive shaft)
0.1 piece
 Damage code WPD0 066 000 2
Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a
discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed.
© 2023 Porsche Cars North America, Inc.
AfterSales
Apr 27, 2023
Page 7 of 7