NCU-2023040014

WORK DESCRIPTION FOR FIELD MEASURE
Check gap dimension of fender to left and right tail lamp, rework if necessary
Check/test procedure
1. Check gap dimensions (figure 1) of tail lamp (left and right) to fender in radius.
Specified value for fender to tail lamp = 1 mm +/-0.5 mm
For basic data, see AR60.00-P-0900-01EQS.
Figure 1
2. Check fender in radius of tail lamp for paint damage.
a. If the gap dimension does not correspond to 1 mm +/-0.5 mm: Carry out work
procedure .
b. If there is paint damage due to a too small gap dimension: Process paint damage in
accordance with Mercedes-Benz specifications.
c. If gap dimension corresponds to 1 mm +/-0.5 mm: End measure.
1/2
Field measure management GSP/TPR
Work procedure
1. Release tail lamp and reposition.
For basic data, see AR82.10-P-4731EQS.
2. In the case of paint damage in the area of the lamp housing, carry out a paint repair.
If paint damage exists in the NON-visible area, rework with a touch-up paint pen is sufficient.
If paint damage is present in the visible area, the repair shall be performed in accordance with the
"Mercedes-Benz specifications" and stored in a tamperproof manner!
Operation text and flat rate
Operation
Operation text
no.
12-1612
Check gap dimension of fender to left and
right tail lamp
12-1613
Rework gap dimension of fender to left and
right tail lamp (after check)
12-1614
Extra work for: Rework gap dimension of
tail lamp in veh. with paint damage
2/2
Flat rate
0.1 h
Accounting no./
damage code
82 920 06
0.7 h
82 920 06
Time
82 920 06
prescribed by
foreperson
Field measure management GSP/TPR