A9023252070332_1

Technical Service Bulletin
90 Virtual cockpit: turn signal sound very loud
90 23 25 2070332/1 May 16, 2023.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
A6, S6, RS 6
Avant, A7, A7 e
quattro, S7, RS
7, A8, S8, Q7,
SQ7, Q8, SQ8,
and RS Q8
2021
All
Virtual Cockpit
Condition
When the turn signal is activated, the sound emitted from the internal speaker of the virtual cockpit is intermittently
very loud. When this occurs, the volume is approximately twice as loud as usual.
Technical Background
Software issue in virtual cockpit.
Production Solution
Not Applicable
Service
This TSB replaces Pending Service Solution (PSS) TSB 2068300/2: PSS 90 Audi Virtual Cockpit: Turn signal
sound unusually loud.
SVM Update Instructions:
Always use DoIP when flashing a control module via ODIS in supported vehicles.
To Activate DoIP, select Administration>>General>>GFF Process>>DoIP communication>>Only allow
DoIP communication
This setting will automatically reset when the diagnostic session is ended.
You can tell if DoIP is active by observing a red LED on the VAS 6154(A)
Page 1 of 3
© 2023 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of
this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
Update the Virtual cockpit J285 (address word 0017) using the steps below:
1. Deactivate the Bluetooth or Wi-Fi connection option in ODIS.
2. Ensure DoIP is turned ON.
3. Connect the diagnostics head with a USB cable to the vehicle.
4. Open the “Flash” feature in ODIS. Click on "SVM code input".
5. Enter SVM code FPKWW0060.
6. Ensure a USB stick is connected with update software:
• SD creator part number 8W6 906 961 Q.
7. Ensure the key remains on the reader coil throughout the update.
8. Follow the on screen prompts.
Model
Old
Software
Part Number
Old Software
Version
4K0920794E
4K0920890E
55, 56, 58, 59
4K0920894E
A8
4N0920790F
4N0920794F
(or higher)
New
Software
Version
SVM Code
Input
SD creator part
number
FPKWW0060
8W6 906 961 Q
(or higher)
4K0920790E
4K0920790E
A6, A7,
Q7, Q8
New Software
Part Number
4K0920794E
4K0920890E
60
4K0920894E
55, 56, 58, 59
4N0920790F
4N0920794F
60
Warranty
Claim Type:
• 110 up to 48 Months/50,000 Miles
• G10 for CPO Vehicles – Verify Owner.
• If the vehicle is outside of any warranty, this Technical Service Bulletin is
informational only.
Service Number:
9025
Damage Code:
0039
Labor Operations:
Software Update (Includes checking for
DTCs)
0151 0000
Time stated on
the diagnostic
protocol (Max
100 TU)
Page 2 of 3
© 2023 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of
this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
Diagnostic Time:
GFF – Included in Software update
No allowance
0 TU
Road test prior to the service procedure
No allowance
0 TU
Road test after the service procedure
No allowance
0 TU
Claim Comment:
As per TSB 2070331/2
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Required Parts and Tools
SD Card/USB stick
Quantity
8W6 906 961 Q
01 (Shop tool)
Additional Information
More information on this system can be found in the following resources:
• TSB 2011732: 00 Software Version Management (SVM), operating instructions.
• TSB 2047812: 00 SD Creator: how to set up and use the SD Creator for obtaining vehicle software updates via
the MirrorServer.
All part and service references provided in this TSB (2070332) are subject to change and/or removal. Always
check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the
Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2023 Audi of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Page 3 of 3
© 2023 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of
this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.