No. 43-23-1
Service Bulletin Details
Public Details for: No. 43-23-1
Technical information for wpd4 - retrofitting camera for night vision system
- 2023 -
Models from 2023
2023 PORSCHE 911 |
Service Technical Information 43/23 ENU WPD4 9 WPD4 - Retrofitting Camera for Night Vision System (Stop Delivery) Model Line: 911 (992) Model Year: As of 2023 Equipment: Night View Assist (M No. 9R1) Concerns: Night vision system camera Cause: Due to worldwide semiconductor shortages experienced by some suppliers, the affected vehicles were built without an night vision camera. As a result, the night vision system is not available. Action: Retrofit camera for night vision system. Affected Vehicles: Only vehicles assigned to the campaign (see also PCSS Vehicle Information). AfterSales May 8, 2023 Page 1 of 4 9 Service WPD4 ENU Technical Information 43/23 Installation Position: Installation position of camera for night vision system – (Retrofitting) camera for night vision system Required parts Parts Info: Part No. Designation – Point of use Quantity V04015001LM Night vision system camera 1 piece N 10762601 Hexagon-head bolt – Night vision system camera on holder 4 pieces Required tools • • May 8, 2023 Page 2 of 4 Torque wrench, 2-10 Nm (1.5-7.5 ftlb.), e.g. V.A.G 1783 - Torque wrench, 2-10 Nm (1.5-7.5 ftlb.) Torque wrench, 40-200 Nm (30-148 ftlb.), e.g. V.A.G 1332A - Torque wrench, 40-200 Nm (30-148 ftlb.) AfterSales Service Technical Information • • • • • • • • • • • 43/23 ENU WPD4 9 Battery charger with a current rating of at least 90 A and - if required - also with a current and voltage controlled charge map for lithium starter batteries, e.g. VAS 5908 90 A battery charger 9900 - PIWIS Tester 3 VAS 6430/1A - Adjustment device with reflector VAS 6430/6 - Night View Assist calibration unit VAS 6350A - Calibration unit VAS 6918 - Quick-clamping unit T90009 - T90009 - Insert tool VAS 261 019 - Ratchet ring wrench socket, a/f 19 VAS 6826 - Steering wheel balance T10118 - T10118 - Assembly tool 3438 - 3438 - Hooks Retrofitting camera for night vision system Information Please note that the connection line for the night vision camera is secured to the holder of the night vision camera with a tie-wrap and sealed with a dummy plug. Carefully remove the tie-wrap and dummy plug before installing the night vision camera. Work Procedure: 1 Retrofit camera for night vision system. For this, see: Workshop Manual '908019 Removing and installing infrared camera' Information For the new camera for the night vision system to be back-documented correctly, the PIWIS Tester must be logged in online and in the Porsche Partner Network (PPN). 2 Calibrate camera for night vision system. Workshop Manual '908055 Replacing infrared camera' 3 Only for vehicles with front camera: Calibrate front camera. Workshop Manual '910255 Replacing central control unit for assistance systems' 4 Enter campaign in the Warranty and Maintenance booklet. Warranty processing Information The labor times specified below were determined specifically for carrying out this campaign and may differ from the labor times published in the PCSS Labor Operation List. Scope 1: Not relevant for this vehicle type. AfterSales May 8, 2023 Page 3 of 4 9 Service WPD4 Scope 2: ENU Technical Information 43/23 Retrofitting camera for night vision system • Valid for 911 without front camera Labor time: Retrofitting camera for night vision system Includes: Removing and installing front bumper Calibrating camera for night vision system Labor time: 255 TU Parts required: V04015001LM Night vision system camera 1 piece N 10762601 Hexagon-head bolt 4 pieces Damage code WPD4 066 000 1 Scope 3: Retrofitting camera for night vision system • Valid for 911 with front camera (M No. KA6, 8A4) Labor time: Retrofitting camera for night vision system Includes: Removing and installing front bumper Calibrating camera for night vision system Teaching front camera Labor time: 269 TU Parts required: V04015001LM Night vision system camera 1 piece N 10762601 Hexagon-head bolt 4 pieces Damage code WPD4 066 000 1 Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed. © 2023 Porsche Cars North America, Inc. May 8, 2023 Page 4 of 4 AfterSales