B410223

5/30/23, 1:32 PM
41 02 23_SERVICE ACTION: RIGHT REAR WHEELWELL HUMP
SIB 41 02 23
SERVICE ACTION: RIGHT REAR WHEELWELL HUMP
2023-05-09
Please perform the procedure outlined in this Service Information on all affected vehicles before customer
delivery. In the event the customer has already taken delivery of the vehicle, please perform the procedure
the next time the vehicle is in the shop.
☐
THIS REPAIR IS MOBILE FRIENDLY
MODEL
E-Series
G07
Model Description
X7 Sport Activity Vehicle
Production Date
February 15 – February 25, 2023
SITUATION
Due to prolonged, normal body flex acting on the vehicle during its service life, a small indentation and/or a
crack can form in the body sheetmetal in the right rear wheelwell (aka wheel house). Potential water ingress
and a risk of corrosion is possible.
CAUSE
A possible error in the metal stamping tool for the wheelwell.
CORRECTION
Inspect the wheelwell hump and rework if necessary.
PROCEDURE
1. Remove the right rear wheelwell cover
following the repair instruction listed in
ISTA/AIR (51 71 041).
Copyright ©2023 BMW of North America, Inc.
about:blank
1/8
5/30/23, 1:32 PM
41 02 23_SERVICE ACTION: RIGHT REAR WHEELWELL HUMP
2. Inspect the circular pressed hump on right
rear wheelwell for any cracks and/or
indentations (arrow in photo).
Use a strong light to illuminate the area for the
visual inspection. Touch the hump with a
finger for a tactile inspection.
Note: Move the cables/wires aside to fully
see the hump.
Note: If no cracks or indentations are seen
or felt, no further action is needed.
Reassemble the vehicle
Note: This photo indicates a hump that
requires rework (no good). Continue to
Step 3.
3. Remove the luggage compartment panels following the repair instructions listed in ISTA/AIR (51 47 220).
4. Using the attached document in this SIB, cut
out the Parts replacement panel using the
template and dimensions provided.
The vehicle’s wheelwell panel does not need
to be cut.
Copyright ©2023 BMW of North America, Inc.
about:blank
2/8
5/30/23, 1:32 PM
41 02 23_SERVICE ACTION: RIGHT REAR WHEELWELL HUMP
5. Place the cut panel onto the wheelwell
hump. Using a marker, trace the panel edges
(dotted line) onto the vehicle.
6. Clean the marked area of coating, wax, and
body sealant.
Copyright ©2023 BMW of North America, Inc.
about:blank
3/8
5/30/23, 1:32 PM
41 02 23_SERVICE ACTION: RIGHT REAR WHEELWELL HUMP
7. The two ends of the crack/indentation must
be drilled using a 3 mm drill bit. This prevents
the crack/indentation from expanding.
Note: Before drilling, care must be taken to
not damage any internal parts or control
devices located on the back surface (in
luggage compartment wheelwell wall). If
necessary, remove them before drilling.
Note: After drilling, the drill chips must be
vacuumed out of the luggage
compartment.
8. Apply K5 adhesive to the panel.
Note: Review notes on handling K5
adhesive (41 00 repair instructions).
Copyright ©2023 BMW of North America, Inc.
about:blank
4/8
5/30/23, 1:32 PM
41 02 23_SERVICE ACTION: RIGHT REAR WHEELWELL HUMP
9. Place and press the panel onto the
wheelwell hump firmly. Coat the cut edges with
K5 adhesive. If necessary, secure the panel
using tape to prevent it from slipping off.
Note: Allow K5 adhesive to cure/harden for
approx. 10 hours at room temperature
(~68º F).
Note: Seal the area with D2 sealant.
10. Reassess the vehicle once repair is completed.
PARTS INFORMATION
Please monitor the weekly Parts Matrix for the cover panel ordering procedure.
Obtain and confirm the part numbers for your specific vehicle by entering the chassis number in either ETK
or AIR which considers specific equipment and/or options.
Part Number
41 00 7 947 142
Description
Cover panel, wheel house, right
Quantity
1
Bulk Materials – Center Workshop Repair (WP 3, 4, 5, 6)
83 19 5 A66 E25
83 19 2 158 654
Sealant D2
Body adhesive K5
Sublet
Sublet
CLAIM INFORMATION
Reimbursement for this Action will be via normal claim entry utilizing the applicable work package
information below, and when applicable, including the third-party sublet repair.
Plus work (+)
Main work
The vehicle new in-stock or is already in the workshop
The vehicle arrives for this Service Action, no other Main work will be
performed/claimed during this workshop visit
Only one of the flat rate labor operation codes listed below can be used for claim submission and reimbursement. Also, only
one Main work flat rate labor operation code can be claimed per workshop visit.
Defect Code:
0041180200
G07 Rework the wheel arch end plate
A. Center Workshop Inspection (No Repair is Necessary)
Work Pkg
Labor
Operation
Description
Labor Allowance
#1
00 73 955
Checking the rear right wheel arch end plate
(No repair is necessary) (Plusposition)
3 FRU
Copyright ©2023 BMW of North America, Inc.
about:blank
5/8
5/30/23, 1:32 PM
#2
41 02 23_SERVICE ACTION: RIGHT REAR WHEELWELL HUMP
Checking the rear right wheel arch end plate
(No repair is necessary) (Main)
00 73 358
5 FRUs
Or:
B. Center Workshop Inspection and Repair
Work Pkg
Labor
Operation
Description
Labor Allowance
#3
00 73 957
Checking and reworking the rear right wheel
arch end plate (Plusposition)
23 FRU
00 73 360
Checking and reworking the rear right wheel
arch end plate (Main)
24 FRU
Or:
#4
Or:
With ARS (Option Code SA2VS)
Work Pkg
Labor Operation
#5
00 73 956
Description
Checking and reworking the rear right wheel
arch end plate with dual storage battery
(Plusposition)
Labor Allowance
31 FRU
Or:
#6
Checking and reworking the rear right wheel
arch end plate with dual storage battery (Main)
00 73 359
32 FRU
And:
Sublet – Bulk Materials for WP 3, 4, 5, 6 (RO and Claim Comments Required)
Sublet Code
Up to $25.00
4
Reimbursement for the repair-related bulk materials (Do not use the
BMW part numbers for claim submission)
Sublet reimbursement calculation for claiming the applicable repair-related bulk materials (BMW part
numbers) is at the dealer net price amount for the proportional quantities used plus your center’s handling.
Enter this material cost in sublet and itemize the amount on the repair order and in claim comment section.
Or:
C. Center Workshop Inspection with a Third-Party Rework Repair (CCRC or Approved Body Shop)
Work Pkg
Labor Operation
Description
Labor Allowance
#7
00 74 674
Check rear right wheel arch end plate for
external service (Plusposition)
1 FRU
00 74 074
Check rear right wheel arch end plate for
external service (Main)
3 FRU
Or:
#8
And:
Third-Party
Description (Associated work for WP 7 and WP 8)
Sublet Code 3
Reimbursement for third-party repair to rework right rear wheel
arch end plate including the used quantities of approved bulk
materials (excluding the Cover panel, wheel house, right and
other repair related/required BMW part numbers to be invoiced on
Copyright
©2023 BMW of North America, Inc.
the repair order
and claimed)
about:blank
Sublet
Allowance
Up to $425.00
6/8
5/30/23, 1:32 PM
41 02 23_SERVICE ACTION: RIGHT REAR WHEELWELL HUMP
Invoice the eligible rework labor/used bulk materials in sublet on the repair order at the actual cost charged
with no handling or markup. The sublet amount must also include any discounts or allowances.
The appropriate charge for the “necessary repair-related rework procedures” is determined by comparing
the charged amount against the corresponding amount that is based on your warranty rates.
Prior to performing the repair, calculate your center’s repair cost and then obtain outside repair estimate(s)
for price comparison purposes.
It is your center’s responsibility to review the repair cost estimate prior to the repair being
performed. This will help ensure that the amount requested for the paint work is customary, fair,
and reasonable. Also, it must not exceed the scope of the repair work described in this bulletin.
Itemize the claimed sublet amount on the repair order and in the claim comment section.
Claim Repair Comments
Reference the SIB number and the work package (Pkg) number performed in the RO technician notes and the claim
comments (For example: B41 02 23 WP 1), unless otherwise required by State law.
Additionally for WP 3 through WP 8: As noted above, explain/itemize the claimed sublet amount.
FEEDBACK REGARDING THIS BULLETIN
Technical Feedback
Warranty Feedback
Parts Feedback
To submit feedback for the technical topic of this bulletin: Submit your
feedback in the rating box at the top of this bulletin
To submit feedback for the CLAIMS section of this bulletin: Submit an IDS
ticket to the Warranty Department, or use the chat available in the
Warranty Documentation Portal
To submit feedback for the PARTS section of this bulletin: Submit an IDS
ticket to the Parts Department
Supporting Materials
picture_as_pdf 41 02 23_Attachment 1.pdf
Copyright ©2023 BMW of North America, Inc.
about:blank
7/8
5/30/23, 1:32 PM
41 02 23_SERVICE ACTION: RIGHT REAR WHEELWELL HUMP
Copyright ©2023 BMW of North America, Inc.
about:blank
8/8
B41 02 23
April 2023
Patch
115mm
34mm
13mm
75mm
106mm
48mm
EP-41 | 4.4.2023 | Kurz
-2-