A6623002055713_4

Service Bulletin Details

Public Details for: A6623002055713_4

This bulletin advises that a decorative license plate frame cannot be installed.


- 2024 - 2023 - 2022 - 2021 - 2020 - 2019 -

Models from 2024
2024 AUDI Q3
Models from 2023
2023 AUDI Q3
Models from 2022
2022 AUDI Q3
Models from 2021
2021 AUDI Q3
Models from 2020
2020 AUDI Q3
Models from 2019
2019 AUDI Q3
Technical Service Bulletin
66 Rear license plate - decorative frame cannot be installed
66 23 00 2055713/4 June 15, 2023. Supersedes Technical Service Bulletin Group 66 number 22-87 dated May 6,
2022, for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
Q3
2019 – 2024
All
Not Applicable
Condition
REVISION HISTORY
Revision
Date
Purpose
4
-
Revised header (Added MY 2024)
3
05/06/2022
Revised header (Added MY 2023)
2
06/15/2021
Revised header (Added model years)
When attempting to install a rear license plate with a novelty or decorative license plate frame the installation
cannot be completed.
Technical Background
1. Installation of the license plate
together with the novelty or
decorative plate frame is not
possible due to interference
between the frame and the
rearview camera.
Figure 1. Interference between the decorative license plate frame and the
rearview camera.
Page 1 of 3
© 2023 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights
of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without
the prior expressed written permission of the publisher.
Technical Service Bulletin
2. The license plate without the
frame will be successfully
installed on the rear license
plate holder without any
interference.
Figure 2. The rear license plate successfully installed on the new Q3.
Production Solution
Not Applicable
Service
Do not attempt to install a rear license plate with a novelty or decorative license plate frame on the new
Q3. Damage to the rearview camera may occur. Additionally, do not eliminate or make any modification to the
rear license plate holder in an attempt to facilitate the installation of the license plate with the frame to the
vehicle. Any contact with the rearview camera is to be avoided.
Warranty
This TSB is informational only and not applicable to any Audi warranty.
Additional Information
All part and service references provided in this TSB (2055713) are subject to change and/or removal. Always
check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the
Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2023 Audi of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes
Page 2 of 3
© 2023 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights
of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without
the prior expressed written permission of the publisher.
Technical Service Bulletin
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Page 3 of 3
© 2023 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights
of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without
the prior expressed written permission of the publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.