07-211-23
Service Bulletin Details
Public Details for: 07-211-23
This bulletin provides the printable target chart needed to perform the wide angle mono camera adjustment procedure for the eyesight system.
Models from 2024
2024 SUBARU CROSSTREK |
2024 SUBARU IMPREZA |
Models from 2023
2023 SUBARU ASCENT |
2023 SUBARU LEGACY |
2023 SUBARU OUTBACK |
ATTENTION: GENERAL MANAGER q PARTS MANAGER q CLAIMS PERSONNEL q IMPORTANT - All Service Personnel Should Read and Initial in the boxes provided, right. SERVICE MANAGER q © 2022 Subaru of America, Inc. All rights reserved. SERVICE BULLETIN APPLICABILITY: SUBJECT: 2023MY Legacy & Outback 2023MY Ascent 2024MY Impreza 2024MY Crosstrek NUMBER: 07-211-23 DATE: 06/05/23 EyeSight / Wide Angle Mono Camera Adjustment INTRODUCTION: This Service Information Bulletin provides the printable target chart needed to perform the wide angle mono camera adjustment procedure for the EyeSight system. Please follow the printing procedures outlined below when using the target chart provided in this bulletin. Target Chart Information: Refer to the wide angle mono camera adjustment and inspection information found in the applicable Service Manual: Body & Electrical/WIRING SYSTEM > EyeSight > Wide Angle Mono Camera Adjustment, Inspection > Procedure 1. When printing the attached document, confirm the printer settings are set to “Tabloid” and “Actual Size.” The preferred paper size is 11 X 17 inches. NOTE: If tabloid 11 X 17 inch paper is not available, standard letter 8.5 X 11 inch paper can be used by split printing and fitting the two sections together. 2. ALWAYS confirm the printed target is the correct size by measuring the specified points outlined below. a. 104 mm (4.09 in) b. 130 mm (5.12 in) c. 260 mm (10.24 in) CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS. Subaru Service Bulletins are intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely. If a condition is described, DO NOT assume that this Service Bulletin applies to your vehicle, or that your vehicle will have that condition. Subaru of America, Inc. is ISO 14001 Compliant ISO 14001 is the international standard for excellence in Environmental Management Systems. Please recycle or dispose of automotive products in a manner that is friendly to our environment and in accordance with all local, state and federal laws and regulations. Continued... Bulletin Number: 07-211-23; Date: 06/05/23 Page 1 of 4 3. Once the target chart is printed and the sizing is confirmed, cut and trim the target chart along all four edges. See the image below. 4. Attach the target chart to a suitable vertical partition with a flat surface and continue the adjustment procedure as per the applicable Service Manual. Continued... Bulletin Number: 07-211-23; Date: 06/05/23 Page 2 of 4 IMPORTANT REMINDERS: • SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time. • Always check for any open recalls or campaigns anytime a vehicle is in for servicing. • Always refer to STIS for the latest service information before performing any repairs. Bulletin Number: 07-211-23; Date: 06/05/23 Page 4 of 4