TT241302
Service Bulletin Details
Public Details for: TT241302
When diagnosing a no crank/no start concern with no ecm communication, be sure to check ecm 30 power circuit to t121/62.
Models from 2008
2008 VOLKSWAGEN JETTA |
2008 VOLKSWAGEN RABBIT |
Models from 2007
2007 VOLKSWAGEN JETTA |
2007 VOLKSWAGEN RABBIT |
Models from 2006
2006 VOLKSWAGEN JETTA |
2006 VOLKSWAGEN RABBIT |
Models from 2005
2005 VOLKSWAGEN JETTA |
2005 VOLKSWAGEN RABBIT |
Tech Tips Date: May 17, 2013 TT 24-13-02 2005-2008 Jetta, Rabbit with 2.5L Engine – Engine Will Not Crank/Start, No ECM Communication, Fault 01314 When diagnosing a no crank/no start concern with no ECM communication, be sure to check ECM 30 power circuit to T121/62. Perform voltage drop between battery positive post and this pin at ECM with key on. If excessive voltage drop is measured, check for break in wire at splice located 6-18 inches from ECM. Page 1 of 1 ver1.2 © 2013 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.