NTB23-055
Service Bulletin Details
Public Details for: NTB23-055
Fuel odor if you confirm the customer states they smell fuel, and the mil is not on and there are no stored dtcs. Action 1. Check for evidence of any fuel leak. 2. Check for any malfunctioning fuel system or evap system parts. 3.
Models from 2023
2023 NISSAN ROGUE |
Models from 2022
2022 NISSAN ROGUE |
Models from 2021
2021 NISSAN ROGUE |
Classification: Reference: FE23-001 Date: NTB23-055 June 21, 2023 FUEL ODOR APPLIED VEHICLES: APPLIED ENGINES: 2021-2023 Rogue (T33) KR15DDT IF YOU CONFIRM The customer states they smell fuel, AND The MIL is not ON and there are no stored DTCs. ACTION 1. Check for evidence of any fuel leak. 2. Check for any malfunctioning fuel system or EVAP system parts. 3. If no concerns are found, replace the PCV hose with the one listed in PARTS INFORMATION following the SERVICE PROCEDURE in this bulletin. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. 1/4 SERVICE PROCEDURE 1. Check for evidence of any fuel leak and correct as necessary. 2. Check for any malfunctioning fuel system or EVAP system parts and correct as necessary. 3. If no concerns are found, replace the PCV hose with the one listed in PARTS INFORMATION. a. Engine cover Remove the engine cover by pulling it off in an upwards direction. Figure 1 b. Locate the PCV hose to be replaced. PCV hose to be replaced Figure 2 2/4 NTB23-055 c. Relocate the clamps that secure the PCV hose, to allow for PCV hose removal. PCV hose clamps Figure 3 d. Pull on the PCV hose in the directions shown in Figure 4, for PCV hose removal. PCV hose Figure 4 e. Install the new PCV hose in the reverse order of removal. f. Reinstall the engine cover. 3/4 NTB23-055 PARTS INFORMATION DESCRIPTION PART NUMBER QUANTITY ADM/V BLOWBY-HOSE (HOSE ASSY-BLOWBY) 11823-6RC9D 1 CLAIMS INFORMATION Submit a Primary Part (PP) type line claim using the following claims coding: (1) (2) DESCRIPTION PFP OP CODE SYM DIA FRT Replace PCV Hose (1) AR32AA ZE 32 (2) Reference the electronic parts catalog and use the Blowby Gas Hose (11823-*****) as the Primary Failed Part (PFP). Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat Rate Time (FRT). AMENDMENT HISTORY PUBLISHED DATE REFERENCE June 21, 2023 NTB23-055 DESCRIPTION Original bulletin published 4/4 NTB23-055