NTB23-056

Classification:
Reference:
AT23-003
Date:
NTB23-056
June 21, 2023
VOLUNTARY SERVICE CAMPAIGN
2022-2023 FRONTIER AND 2023 TITAN/TITAN XD;
AUTOMATIC PARK FUNCTION
CAMPAIGN ID #:
APPLIED VEHICLES:
PC982
2022-2023 Frontier (D41)
2023 Titan/Titan XD (A61)
Check Service COMM or Dealer Business Systems (DBS)
National Service History to confirm campaign eligibility.
INTRODUCTION
Nissan is conducting this voluntary service campaign, on certain specific model year 20222023 Frontier and 2023 Titan/Titan XD vehicles, to configure the Automatic Park function.
This service will be performed at no charge to the customer for parts or labor.
IDENTIFICATION NUMBER
Nissan has assigned identification number PC982 to this campaign. This number must
appear on all communication and documentation of any nature dealing with this campaign.
DEALER RESPONSIBILITY
Dealers are to repair vehicles falling within range of this campaign that enter the service
department. This includes vehicles purchased from private parties, vehicles presented by
transient (tourists) owners, and vehicles in a dealer’s inventory.
-
Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/6
SERVICE PROCEDURE
1.
Start the engine.
2.
With the transmission in the PARK position, inspect the P in the gear indicator on the
combination meter.

If the P indicator is flashing, continue to step 3 to configure the Automatic Park
function.

If the P indicator is not flashing, no further action is required. Skip to the CLAIMS
INFORMATION on the last page.
Figure 1
3.
Turn the ignition OFF.
IMPORTANT: Before starting, make sure:

All CONSULT-III software updates (if any) have been installed.
4.
Confirm that the CONSULT PC is connected to Wi-Fi.
5.
Turn the ignition ON, engine OFF.
6.
Connect the VI to the vehicle.
7.
Start C-III plus.
8.
If prompted, select USA/CANADA Dealers from the drop down menu, and then
select OK.
2/6
NTB23-056
9.
Login using your NNAnet credentials.
IMPORTANT: If not prompted to enter your username and password, the CONSULT
PC may not be connected to Wi-Fi. Close C-III plus, confirm the CONSULT PC is
connected to Wi-Fi, and then reopen C-III plus.
10.
Wait for the VI to be recognized.

11.
The serial number will display when the VI is recognized (Figure 2).
Select Diagnosis (All Systems)
VI is
recognized
Figure 2
12.
Select TRANSMISSION under the All DTC tab.
Figure 3
3/6
NTB23-056
13.
Select Work support.
Figure 4
14.
Select CANCEL AUTOMATIC PARK FUNCTION, and then select Start.
Figure 5
4/6
NTB23-056
15.
Select Off, and then select End.

Verify Current status shows “Off”.
HINT: DTC P18A5-00 will automatically clear after changing the CANCEL
AUTOMATIC PARK FUNCTION to Off.
Off
Figure 6
16.
Close C-III plus and disconnect the VI.
17.
Start the engine.
18.
With the transmission in the PARK position, inspect and verify that the P in the gear
indicator on the combination meter is no longer flashing.
Figure 7
5/6
NTB23-056
CLAIMS INFORMATION
Submit a “CM” line claim using the following claims coding:
CAMPAIGN (“CM”) ID
DESCRIPTION
Inspect Gear Position Indicator
(OK Condition)
Inspect Gear Position Indicator and
Configure the Automatic Park Function
PC982
OP CODE
FRT
PC9820
0.2
PC9821
0.3
AMENDMENT HISTORY
PUBLISHED DATE
REFERENCE
June 21, 2023
NTB23-056
DESCRIPTION
Original bulletin published
6/6
NTB23-056