A0123702071242_1

Service Bulletin Details

Public Details for: A0123702071242_1

This bulletin provides information for when there is a drive system fault with dtc P060C00.


- 2022 - 2021 - 2020 -

Models from 2022
2022 AUDI A7 PHEV
Models from 2020
2020 AUDI Q5 PHEV
Technical Service Bulletin
01 Drive system fault - P060C00 - 2.0 ltr. 4-cyl. TFSI
01 23 70 2071242/1 August 18, 2023.]
Model(s)
Year
Q5 e quattro
2020 – 2021
A7 e quattro
2021 – 2022
VIN Range
Vehicle-Specific Equipment
All
Not Applicable
Condition
Customer states:
• A fault is indicated in instrument cluster.
• Vehicle has reduced power.
Workshop findings:
The following DTC and symptom code combinations are stored in the Engine Control Module, J623 (address
word 0001):
• P060C00 “Internal Control Module Main Processor Performance” is stored in the diagnostic log with symptom
32328.
Technical Background
The software for the TCM control module, J217 (address word 0002) needs to be updated.
Production Solution
New software in the Transmission control module, J217 (address word 0002) addressed the condition.
Service
Always use DoIP when flashing a control module via ODIS in supported vehicles.
To Activate DoIP, select Administration>>General>>GFF Process>>DoIP communication>>Only allow
DoIP communication
This setting will automatically reset when the diagnostic session is ended.
You can tell if DoIP is active by observing a red LED on the VAS 6154(A)
1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions.
© 2023 Audi of America, Inc.
Page 1 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
2. Update the TCM (J217) using the SVM action code as listed in the table below, if necessary:
Model
ECM
TCM Old
Software Part
Number
TCM Old
Software
Version
TCM New
Software Part
Number
TCM New
Software
Version
(or lower)
(or higher)
(or higher)
SVM Code
Input
Q5
80A.906.259.B
80A.927.156.C
0004
80A.927.156.C
0005
02A220
Q5
80A.906.259.C
80A.927.156.D
0002
80A.927.156.D
0003
02A220
A7
4K0.906.259.L
4K0.927.156.D
0001
4K0.927.156.D
0002
02A220
Warranty
Claim Type:
• 110 up to 48 Months/50,000 Miles.
• G10 for CPO Covered Vehicles – Verify Owner.
• If the vehicle is outside of any warranty, this Technical Service Bulletin is
informational only.
Service Number:
2470
Damage Code:
0039
Labor Operations:
Software Update (Includes checking for
DTCs)
0151 0000
Time stated on
the diagnostic
protocol (Max
50 TU)
Diagnostic Time:
GFF
No allowance
0 TU
Road test prior to the service procedure
No Allowance
0 TU
Road test after the service procedure
No allowance
0 TU
Claim Comment:
As per TSB 2071242/1
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Required Parts and Tools
Tool Number
Tool Description
VAS 6160/VAS 6150
VAS tester with the current version of ODIS (Windows 10)
© 2023 Audi of America, Inc.
Page 2 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
Additional Information
All part and service references provided in this TSB (2071242) are subject to change and/or removal. Always
check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the
Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2023 Audi of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites without the prior expressed written permission of the
publisher.
© 2023 Audi of America, Inc.
Page 3 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.