TB151403
Service Bulletin Details
Public Details for: TB151403
Camshaft adjustment valve 1 -n205- diagnosis
- 2014 - 2013 - 2012 - 2011 - 2010 - 2009 -
Models from 2014
Models from 2013
Models from 2012
Models from 2011
| 2011 VOLKSWAGEN GOLF |
| 2011 VOLKSWAGEN GOLF WAGON |
| 2011 VOLKSWAGEN JETTA |
| 2011 VOLKSWAGEN JETTA SPORTWAGEN |
| 2011 VOLKSWAGEN RABBIT |
Models from 2010
| 2010 VOLKSWAGEN GOLF |
| 2010 VOLKSWAGEN GOLF WAGON |
| 2010 VOLKSWAGEN JETTA |
| 2010 VOLKSWAGEN JETTA SPORTWAGEN |
| 2010 VOLKSWAGEN RABBIT |
Models from 2009
| 2009 VOLKSWAGEN GOLF |
| 2009 VOLKSWAGEN JETTA |
| 2009 VOLKSWAGEN JETTA SPORTWAGEN |
| 2009 VOLKSWAGEN RABBIT |
Technical Bulletin Model(s) Jetta Sedan, Jetta Wagon, Jetta SportWagen, Rabbit, Golf, Golf Wagon Passat, Beetle, Beetle Convertible Year Eng. Code Trans. Code 2.5L 5 spd Manual (MQ250) VIN Range From VIN Range To All All All All 2009-2014 (CBTA, CBUA) 6 spd Automatic (AQ250) 5 spd Manual (MQ250) 2.5L 2012-2014 (CBTA, CBUA) 6 spd Automatic (AQ250) Condition 15 14 03 October 10, 2014 2032173 Supersedes T.B. V151301 dated January 2, 2013 to include model year 2014 applicability. Camshaft Adjustment Valve 1 -N205- Diagnosis One or more of the following fault codes may be stored in the ECM Fault Memory: DTC P0011 Description “A” Camshaft Position (Bank1) Timing over-advanced or System Performance P000A "A" Camshaft Position Slow Response (Bank 1) P052A Cold Start "A" Camshaft Position Timing OverAdvanced Note: DO NOT diagnose or replace components due to camshaft position faults before performing the repair procedure as outlined in this bulletin. DO NOT diagnose or replace camshaft control valve before performing the repair procedure as outlined in this bulletin. Page 1 of 8 © 2014 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Technical Background Completing the GFF function test and performing basic settings on the camshaft adjustment valve are essential to diagnose proper operation and to avoid unnecessary replacements. Production Solution Optimized engine cleaning procedure in production. Service Note: Test steps for this bulletin are written for diagnosis using Off-board Diagnosis Information System (ODIS). Though the tests performed will be the same, the process required to run the function tests may be different if VAS-PC is used. Perform Guided Fault Finding test plan for N205 – Camshaft adjustment valve 1 to determine operation of valve • Once ODIS has loaded, and the vehicle information has been updated, select the “Test Plan” top tab. • Select either the “Select self test” button and locate the test plan for the “N205 Camshaft adjustment valve 1,” or utilizing the search button in the “Extras” drop down side tab, search for “N205” with the object type “Test” selected. • Attach the “N205 – Camshaft adjustment valve 1 (Rep.Gr.15)” test to the test plan list. • Highlight the N205 – Camshaft adjustment valve 1 test plan and select “Perform Test”. Page 2 of 8 © 2014 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin • When the test starts, the Camshaft adjustment valve -N205- will be activated via the output diagnosis test mode, listen and/or feel for an audible “click” sound coming from the N205 adjustment valve. • Answer on screen prompts. Tip: The audible “click” sound may be heard easier if the engine compartment is open • If audible “click” noise is heard, the valve itself, wires and the control module are OK. • If prompted to continue function test, select “No”. • Complete remainder of test plan. • If audible “click” noise is not heard, continue Guided Fault Finding based diagnosis. Tip: If audible “click” noise is heard, the N205 Camshaft adjustment valve is operational, and basic settings must be performed to verify full functionality of the camshaft adjustment system. Page 3 of 8 © 2014 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Perform basic settings to verify proper functionality of N205 - Camshaft adjustment valve 1 Note: The engine must be running at idle, with the transmission in the park or neutral positions, in order to perform the following procedure. • Open the “Control modules” top tab. • Right click on the engine control module in the control module list and select “Control module OBD.” • Select “Basic Setting”. • Scroll through the function group selection list and select function group “94”. • Select “Read measured values” button. Page 4 of 8 © 2014 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin • Select “Basic setting” button. • Simultaneously hold the brake pedal and press the throttle pedal to “wide open throttle” for the duration of the test. • System status will be displayed when test is complete. • If system is OK and vehicle has less than 5000 miles over all, or since last oil service, do not replace N205 Camshaft adjustment valve 1. Clear fault codes, and perform road test to verify repair. • If system is OK and has greater than 5000 miles over all, or since last oil service, do not replace N205 Camshaft adjustment valve 1. Clear fault codes, change engine oil and filter, and perform road test to verify repair. • If faults return, this technical bulletin does not apply. Continue Guided Fault Finding based diagnosis. • If system is not OK, this technical bulletin does not apply. Continue Guided Fault Finding based diagnosis. Page 5 of 8 © 2014 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Warranty To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and 1) Procedures Manual Model(s) Year(s) Jetta Sedan, Jetta Wagon, Jetta SportWagen, Golf Wagon, Rabbit, Golf Eng. Code(s) Trans. Code(s) 2.5L 5 spd Manual (MQ250) 2009-2014 (CBTA, CBUA) Passat, Beetle, Beetle Convertible VIN Range From VIN Range To All All All All 6 spd Automatic (AQ250) 5 spd Manual (MQ250) 2.5L 2012-2014 (CBTA, CBUA) 6 spd Automatic (AQ250) SAGA Coding Claim Type: Use applicable Claim Type 1) Damage Service Number: HST Damage Location (Depends on Service No.) -- Use applicable when indicated in ElsaWeb (L/R) Code 1584 0010 Parts Manufacturer Golf, Rabbit, Passat WWO Jetta, Jetta Wagon, Jetta SportWagen, Golf Wagon, Beetle, Beetle Convertible 3ME 3) Labor Operation : Oil/Filter Change 2) 2) 17305599 = 50 TU Participating Dealers – Oil Program Regular Material: See ServiceNet: SAGA Job Aids “Oil Part Pricing Synthetic oil part number G 052167S0, Qty. of 63 for SAGA Reimbursement” Page 6 of 8 © 2014 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Non-Participating Dealers – Oil Program Outside Material: See ServiceNet: SAGA Job Aids “Oil Part Pricing Synthetic oil part number – SYNGOIL Qty. of 63 for SAGA Reimbursement” Causal: Select labor operation 17305599 Diagnostic Time 4) GFF Time expenditure 01500000 = 25 TU max. YES Road Test 01210004 = 10 TU YES Technical Diagnosis 01320000 = 00 TU max. NO Claim Comment: Input “As per Technical Bulletin 2032173” in comment section of Warranty Claim. 1) Vehicle may be outside any Warranty in which case this Technical Bulletin is informational only 2) Code per warranty vendor code policy. 3) Labor Time Units (TUs) are subject to change with ELSA updates. 4) Documentation required per Warranty Policy Procedures Manual. Required Parts and Tools Part Description Oil Filter Part No: Quantity 06D 115 562 1 Tool Description Tool No: Midtronics Battery Tester/Charger InCharge 940 (INC-940) or GRX3000VAS VAS Diagnostic Tool VAS 6150/X & VAS 6160/X with ODIS Service with: current online updates Page 7 of 8 © 2014 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Additional Information All part and service references provided in this Technical Bulletin are subject to change and/or removal. Always check with your Parts Dept. and Repair Manuals for the latest information. Page 8 of 8 © 2014 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.