SSM 51863

Service Bulletin Details

Public Details for: SSM 51863

During replacement of the electronic front stabilizer bar disconnect assembly on 2021-2023 bronco vehicles, removal and replacement of the sta-bar harness is required. To assist engineering with root cause analysis of failed sta-bar disconn


- 2023 - 2022 - 2021 -

Models from 2023
2023 FORD BRONCO
Models from 2022
2022 FORD BRONCO
Models from 2021
2021 FORD BRONCO 
SSM 51863 2021-2023 Bronco - Equipped With Sta-Bar Disconnect
Assembly And Harness
During replacement of the electronic front stabilizer bar disconnect assembly on 2021-2023 Bronco
vehicles, removal and replacement of the sta-bar harness is required. To assist engineering with root
cause analysis of failed sta-bar disconnect assemblies, include the sta-bar harness with the part in the
same package when returning warranty replacement sta-bar disconnect assembly. The sta-bar
disconnect assembly return should also be packaged in the original box with all protective insulators in
place to properly protect it during shipping. Use the Report a Vehicle Concern link at the bottom of
OASIS to submit a report with photos attached (if possible) for any front stabilizer bar disconnect
concerns.

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.