TSB-23-13-005

SUBJECT:
FUEL FILLER TUBE REMOVAL PROCEDURE SERVICE MANUAL REVISION
NO:
TSB-23-13-005
DATE:
August 2023
MODEL: 2022-2024 Outlander
CIRCULATE TO:
[ ] GENERAL MANAGER
[ X ] PARTS MANAGER
[ X ] TECHNICIAN
[ X ] SERVICE ADVISOR
[ X ] SERVICE MANAGER
[ X ] WARRANTY PROCESSOR
[ ] SALES MANAGER
PURPOSE
This bulletin provides the Fuel Filler Tube removal procedure.
AFFECTED VEHICLES
2022-2024 Outlander
AFFECTED SERVICE MANUAL
• 2022-2024 Outlander
PROCEDURE
Please use the following chart as a guide to replace the indicated pages in the affected Service
Manuals, Group 13, Engine, Fuel System, Removal and Installation, Fuel Tank.
Applicable manual
2022
OUTLANDER
Service manual
2023
OUTLANDER
Service manual
2024
OUTLANDER
Service manual
Pub. No.
MSCD-030B-2022
(Volume 2)
MSCD-030B-2023
(Volume 1)
Applicable Title
ENGINE
└ FUEL SYSTEM
└ REMOVAL AND INSTALLATION
└ FUEL TANK
└ Removal and Installation
Contents
Attached
sheet 2
MSCD-030B-2024
(Volume 1)
Copyright 2023, Mitsubishi Motors North America, Inc.
8/2/2023
1 of 3
(5334/MSB23M13501)
FUEL SYSTEM
Attached sheet 2 (1/2)
REMOVAL AND INSTALLATION
FUEL TANK
Removal and Installation
REMOVAL
Fuel Tank

WARNING:
Be sure to read “General Precautions” when working on the fuel system. Refer to General Precautions.
1. Perform the
2. Drain
steps 1 to 7 of “REMOVAL” in “ FUEL LEVEL SENSOR UNIT, FUEL FILTER AND FUEL PUMP ASSEMBLY”. Refer to Removal and Installation.
fuel from fuel tank if necessary. Refer to Removal and Installation.
CAUTION:
•
Because fuel tank forwardly inclines and becomes unstable when installing/removing, fuel should be drained if found the remaining quantity.
•
Situate vehicle on a flat and solid surface.
3. Remove
main muffler. Refer to Removal and Installation.
4. Remove
rear propeller shaft. Refer to Removal and Installation.
5. Remove
under cover LH and under cover RH.
6. Disconnect EVAP tube
from EVAP canister.
7. Remove
at fuel filler tube side.
CF100A12AA00USA
fuel filler hose
CF100A13AA00USA
: Vehicle front
8/2/2023
2 of 3
(5334/MSB23M13501)
FUEL SYSTEM
8. Support center of fuel tank
with suitable jack
Attached sheet 2 (2/2)
.
CF100A15AA00USA
9. Remove
fuel tank bands.
10.
Tilt the fuel tank forward and lower the fuel tank front 10 cm (3.94 in).
11.
Disconnect vent hose
•
at rear side of fuel tank.
Instruction for quick connector
of EVAP tube. Refer to Quick Connector.
CF100A16AA00USA
: Vehicle front
12.
Lower suitable jack carefully to remove fuel tank while holding it by hand.
CAUTION:
Fuel tank may be in an unstable condition, due to the shape of the fuel tank bottom. Be sure to secure tank at all times.
If replacing the fuel tank, remove the fuel level sensor unit, fuel filter and fuel pump assembly to transfer to the new fuel tank. Remove and discard the O-ring. Refer to FUEL LEVEL SENSOR UNIT.
FUEL FILTER AND FUEL PUMP ASSEMBLY.
13.
Fuel Filler Tube
Remove rear wheel house protector. Refer to REAR WHEEL HOUSE PROTECTOR.
Remove rear suspension member. Refer to REAR SUSPENSION MEMBER.
Remove fuel filler tube.

8/2/2023
3 of 3
(5334/MSB23M13501)