TSB-23-00-019
Service Bulletin Details
Public Details for: TSB-23-00-019
This technical service bulletin provides service manual corrections to the installation precautions for on-vehicle radio transmission equipment.
- 2023 -
Models from 2023
2023 MITSUBISHI OUTLANDER SPORT |
SUBJECT: INSTALLATION PRECAUTIONS FOR ON-VEHICLE RADIO TRANSMISSION EQUIPMENT – SERVICE MANUAL REVISION No: TSB-23-00-019 DATE: August 2023 MODEL: Outlander Sport CIRCULATE TO: [ ] GENERAL MANAGER [ X ] PARTS MANAGER [ X ] TECHNICIAN [ X ] SERVICE ADVISOR [ X ] SERVICE MANAGER [ X ] WARRANTY PROCESSOR [ ] SALES MANAGER PURPOSE This TSB provides precautions for the installation of On-Vehicle Radio Transmission equipment in the applicable Service Manual sections: • General AFFECTED VEHICLES 2023 Outlander Sport AFFECTED SERVICE MANUAL • 2023 Outlander Sport Service Manual PROCEDURE Please use the following chart as a guide to replace the indicated pages in the affected Service Manuals, Group 00, General, Precautions Before Service. Applicable manual 2023 OUTLANDER SPORT Service Manual Pub. No. MSCD-017B-2023 023 Applicable title Content Add: Attached "REQUIRED PROCEDURE AFTER BATTERY TERMINAL CONNECTION" Sheet 2 (M10010294A003500) Copyright 2023, Mitsubishi Motors North America, Inc. The information contained in this bulletin is subject to change. For the latest version of this document, go to the Mitsubishi Dealer Link, MEDIC, or the Mitsubishi Service Information website (www.mitsubishitechinfo.com). 8/11/2023 1 of 2 (5342/MSB23M00003) Attached sheet 2 GENERAL PRECAUTIONS BEFORE SERVICE . PRECAUTIONS FOR INSTALLATION OF ON-VEHICLE RADIO TRANSMISSION EQUIPMENT The computers (control unit) for various on-vehicle electronic equipment are provided with sufficient protective measures against external radio wave interference. However, because the on-vehicle radio transmission equipment may affect adversely the computers (control unit), pay attention to the following precautions for installation. • Install radio transmission equipment and antenna (including coaxial cables) 200 mm or more away from the computers (control unit) for on-vehicle electronic equipment. • Because radio wave is radiated from the coaxial cables of the antenna for radio transmission equipment, do not route the cables in parallel with the vehicle wiring harness. • Install only radio transmission equipment with the frequencies and the output described in the table. FREQUENCY AND OUTPUT OF THE RADIO TRANSMISSION EQUIPMENT Frequency (MHz) Maximum output power (W) 3.5 50 7 14 21 28 50 144 430 1,260 10 • Antenna attachment position AC904380AB Install the antenna for radio transmission equipment only to the position shown in the figure.8/11/2023 2 of 2 (5342/MSB23M00003)