B240323

8/25/23, 3:20 PM
24 03 23_SERVICE ACTION: PROGRAM THE TRANSMISISON CONTROL UNIT (EGS)
SIB 24 03 23
SERVICE ACTION: PROGRAM THE TRANSMISISON CONTROL UNIT
(EGS)
2023-08-18
Please perform the procedure outlined in this Service Information on all affected vehicles before customer
delivery. In the event the customer has already taken delivery of the vehicle, please perform the procedure
the next time the vehicle is in the shop if the campaigns have a status of remedy available.
☒
THIS REPAIR IS MOBILE FRIENDLY
MODEL
ESeries
Model Description
G05
X5 Sports Activity Vehicle
G06
X6 Sports Activity Coupe
G07
X7 Sports Activity Vehicle
G20
3 Series Sedan
G22
4 Series Coupe
G23
4 Series Convertible
G30
5 Series Sedan
Production Date
From June 15, 2020 thru January 20,
2023
From July 30, 2020 thru December 17,
2023
From August 3, 2020 thru June 27,
2023
From July 1, 2020 thru June 30, 2022
From June 19, 2020 thru January 20,
2023
From October 26, 2020 thru May 6,
2021
From June 15, 2020 thru July 7, 2022
Affected
Engine
B58C
B58C
B58C
B58D
B58D
B58D
B58C
AFFECTED VEHICLES
Vehicles which require this campaign to be completed will show it as “Open” when checked either in AIR,
AWP, Campaign Summary, or Warranty Vehicle Inquiry.
Please make sure you check your dealer inventory as soon as possible. You can see a list of affected
vehicles in Inventory Campaign Details (ICD) under ROSS.
For centers that qualify, this campaign repair is eligible to be performed via Mobile Assistance.
SITUATION
A software error may cause an unwanted pressure pulsation in the transmission during a “Remote Engine
Start.”
CAUSE
In rare circumstances, this pulsation may cause damage to the transmission.
CORRECTION
Update the software in the transmission control unit (EGS).
PROCEDURE
Determine what is the vehicle’s current I-level by either using AIR or the Aftersales Workplace (AWP)
application, when applicable:
Program the vehicle using ISTA 4.42.4x or higher (released 8/18/23).
Model
Target Integration level
G05 (X5 Sports Activity Vehicle)
S18A-23-07-535 or higher
G06 (X6 Sports Activity Coupe)
Copyright ©2023 BMW of North America, Inc.
about:blank
1/4
8/25/23, 3:20 PM
24 03 23_SERVICE ACTION: PROGRAM THE TRANSMISISON CONTROL UNIT (EGS)
G07 (X7 Sports Activity Vehicle)
G20 (3 Series Sedan)
G22 (4 Series Coupe)
G23 (4 Series Convertible)
Model
G30 (5 Series Sedan)
Target Integration level
S15A-23-07-535 or higher
Note that ISTA will automatically reprogram and code all programmable control modules that do not have
the latest software.
Always connect a BMW-approved battery charger/power supply (SI B04 23 10) when performing
programming.
For information on programming and coding with ISTA, refer to TIS / Technical Documentation / Diagnostics
and Programming / Programming Documentation.
CLAIM INFORMATION
Vehicle Programming and Encoding
During this workshop visit, the affected vehicle may also show one or more programming and encoding Technical Campaign
repairs open, the programming and encoding procedure may only be invoiced one time.
Select one of these open Technical Campaigns to perform and submit for updating the vehicle to the required I-level
or higher.
Please be sure to also perform any additional before and/or after work (including attaching labels) as required by
the open campaigns on the vehicle. Close any other open programming and encoding Campaign repairs as outlined
in the corresponding Service Information Bulletin.
As determined by the above, reimbursement for this Service Action will be via normal claim entry utilizing
the work package information below that applies.
Repair
Code:
0028220100
---
Below are the special flat rate labor operation code choices for this action.
Completion before the first vehicle delivery to a customer or the vehicle is already in the workshop
Work Pkg
#1
Labor Operation Description (Plus work)
Labor Allowance
00 74 953
Programming and encoding the vehicle
control units (EGS), includes Carrying out
vehicle test (00 00 556/61 21 528)
8 FRU
00 74 954
Programming and encoding the vehicle
control units was performed in conjunction
with another campaign/repair prior to or
during this workshop visit (vehicle is
already at the specified Target integration
level or higher, no repair is necessary)
1 FRU
Or:
#2
Or:
The vehicle arrives at your center and this Service Action shows open (No other Main work will be
performed or claimed during Copyright
this workshop
visit)
©2023
BMW of North America, Inc.
about:blank
2/4
8/25/23, 3:20 PM
24 03 23_SERVICE ACTION: PROGRAM THE TRANSMISISON CONTROL UNIT (EGS)
Work Pkg
Labor Operation Description (Main work)
Labor Allowance
#3
00 74 307
Programming and encoding the vehicle
control units (EGS), includes Carrying out
vehicle test (00 00 006/61 21 528)
10 FRU
00 74 308
Programming and encoding the vehicle
control units was performed in conjunction
with another campaign/repair prior to
this workshop visit (vehicle is already at
the specified Target integration level or
higher, no repair is necessary)
1 FRU
Or:
#4
Only one of the flat rate labor operation codes listed above can be used for claim submission/reimbursement purposes. Also,
only one Main work flat rate labor operation code can be claimed per workshop visit.
Claim Repair Comments
Only reference the SIB number and the work package (Pkg) number performed in the RO technician notes and the claim
comments (For example: B24 03 23 WP 1), unless otherwise required by State law.
Programming and Encoding – Additional Work (RO and Claim Comments Required)
This procedure automatically reprograms and encodes any vehicle control modules that do not have the latest software Ilevel.
If one or more control modules fail during the reprogramming procedure, claim the required consequential repair work
procedures to address this issue (including performing the IRAP Control Unit Recovery first as required, refer to the SIB in
AIR) under the Repair Code in this bulletin with the labor operations that apply.
Please explain the additional work procedures that were performed (The why and the what) on the repair order and in the
claim comments.
For covered repairs that address control module failures that occurred prior to performing this reprogramming procedure,
claim this work with the Repair Code and labor operation codes (including the diagnosis*) that applies.
*Based on which one applies to your center, please refer to SI B01 01 20 or B01 07 20 for the applicable
procedure for documenting, claiming, and explaining, on the RO and in the claim comments, your diagnosis
work time (WT), job/repair work time (WT), and the vehicle repairs your center performed, unless otherwise
required by State law.
FEEDBACK REGARDING THIS BULLETIN
Technical Feedback
Warranty Feedback
Parts Feedback
To submit feedback for the technical topic of this bulletin: Submit your
feedback in the rating box at the top of this bulletin
To submit feedback for the CLAIMS section of this bulletin: Submit an IDS
ticket to the Warranty Department, or use the chat available in the
Warranty Documentation Portal
To submit feedback for the PARTS section of this bulletin: Submit an IDS
ticket to the Parts Department
Copyright ©2023 BMW of North America, Inc.
about:blank
3/4
8/25/23, 3:20 PM
24 03 23_SERVICE ACTION: PROGRAM THE TRANSMISISON CONTROL UNIT (EGS)
Copyright ©2023 BMW of North America, Inc.
about:blank
4/4