ITS60801
Service Bulletin Details
Public Details for: ITS60801
Instructions to change cruise control recovery parameters.
- 2024 -
Models from 2024
2024 MCI J4500 |
INSTRUCTION TO SERVICE ITS-60801 September 5, 2023 SECTION: 219-PROPULSION DRIVE WRITTEN BY: Mark Reitz SUBJECT: Cruise Recovery Parameter in Cummins INSITE. ISSUE: SUMMARY: The adaptive cruise kicks in when there is a slower car ahead, and if that vehicle leaves the space, the recovery will not kick in to bring the coach back up to the set speed the cruise was set to. Performing this procedure will change the cruise recovery parameter that corrects the issue. ITS-60801 Ref. NHTSA Recall No. Not Applicable Ref. Transport Canada Recall No. Not Applicable THIS ITS DOCUMENT SHOULD BE RETAINED AND REFERRED TO FOR FUTURE MAINTENANCE UNTIL THE PARTS AND/OR SERVICE MANUAL IS UPDATED TO REFLECT WORK DONE AS A RESULT OF THIS DOCUMENT. ENSURE THAT THIS DOCUMENT IS AVAILABLE FOR PARTS AND MAINTENANCE STAFF GOING FORWARD. This document and the contents discussed herein are the confidential and proprietary information of New Flyer Industries Canada ULC and New Flyer of America Inc. and are disclosed by New Flyer in confidence. This document and the contents herein are not to be disclosed by the intended recipient without the prior written authorization of New Flyer. Any unauthorized disclosure, reproduction or other distribution of this document or information strictly prohibited and may result in action being taken against the party making the unauthorized disclosure. This document and all copies hereof must be returned to New Flyer upon request. INSTRUCTION TO SERVICE ITS-60801 PROCEDURE: 1. Set park brake and chock wheels. 2. Turn the main battery disconnect switch to the “ON” position. 3. Connect the NEXIQ USB Link 2 adapter to the CAN 1_2 port in the driver’s area and then to the laptop. 4. The Open Cummins INSITE application version 8.8 or older and connect to the ECM. Connect to ECM 5. If a Work Order window pops up, click OK. ITS-60801 Page 2 of 8 September 5, 2023 INSTRUCTION TO SERVICE ITS-60801 6. Select Features and Parameters icon. 7. Expand the Cruise Control folder. Expand the Adaptive Cruise sub folder. Select the cell and change the parameter to “Conventional.” 1 2 ITS-60801 Page 3 of 8 3 September 5, 2023 INSTRUCTION TO SERVICE ITS-60801 8. Select File > Send To > ECM. 1 2 3 9. Select OK to confirm the change. ITS-60801 Page 4 of 8 September 5, 2023 INSTRUCTION TO SERVICE ITS-60801 10. Wait for the update to finish. 11. Follow the prompt and turn the Ignition “ON” before selecting “OK” in the window. ITS-60801 Page 5 of 8 September 5, 2023 INSTRUCTION TO SERVICE ITS-60801 12. Follow the prompt and select “OK.” 13. Disconnect from the ECM. Disconnect from ECM ITS-60801 Page 6 of 8 September 5, 2023 INSTRUCTION TO SERVICE ITS-60801 14. Select File > Exit to shut down the INSITE application. 1 2 LABOUR ESTIMATE Operation 1 Change the Cruise Recovery Parameter in Cummins Number of Technician(s) 1 Hours Labor Time T X HR .5 .5 INSITE. PARTS REQUIRED Item Part Number Qty. per Coach Description 1 Units Notes Units Notes SPECIAL TOOLS REQUIRED Item Part Number Qty. Description 1 Cummins INSITE Version 8.8 or later 1 Software 2 NEXIQ USB Link 2 1 Hardware ITS-60801 Page 7 of 8 September 5, 2023 INSTRUCTION TO SERVICE ITS-60801 ITS-60801 Page 8 of 8 September 5, 2023