ReportL

PERFECT DELIVERY INSPECTION (PDI)
2015
R8 Coupe/R8 Spyder
Audi Technician Report
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
All items must be completed prior to customer delivery by an Audi
technician
**Refer to the Special functions tab of ODIS Diagnosis using GFF
for the PDI function tests
**Audi recommends using an Audi approved battery charger to
prevent excessive battery discharge during inspection
Open Campaigns/Updates
 Check Elsa for open campaigns and updates. Perform
campaigns not requiring SVM if applicable. Campaigns
requiring SVM should only be performed after the vehicle has
been taken out of transport mode
Exterior (continued)
 Check key functionality: Including seat memory (if applicable);
verify vehicle starts and runs with all keys; verify all doors
manually and remotely lock and unlock with all keys
Interior
 Check operation of all switches: Locks, windows, seat adjustment, and child safety features
 Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)
 Verify operation of all interior lights
Battery Inspection
 Mirrors: Inspect folding, adjustments, RH tilt in reverse, and
memory (if equipped)
 Check battery clamps for proper torque. Re-torque if required
 Verify operation of all front and rear seat belts and latches
 Check the battery prior to starting engine with MCR340A.
Record MCR340A code: _________________ or attach printout
 Check horn operation
 Passenger side airbag: Verify operation of Passenger Occupant
Detection System
Transport Mode Deactivation, DTC check, set service reminder
 Deactivate vehicle transport mode
Radio
 Set service reminder (via Special functions –> Service work –>
17-PDI-resetting SRI at PDI, counter reset, etc.)
 Affix anti-theft code sticker found in prep package to this page
 Deactivate the anti-theft function for the Navigation DVD using
the Scan Tool. Follow the process outlined in TSB 2013790
 Verify operation of AMI or aux. input
 Perform any campaign update requiring SVM at this time
(follow instructions listed in campaign documentation)
Under the Hood Fluid Check and Inspection
 Verify operation of CD changer (if equipped)
 SD card slot: Insert SD card and test function (Test all SD card
slots as equipped)
Audi Navigation plus (if equipped)
 Check all fluid levels and top off if necessary
 Verify and set Language and Measurement Units in Setup/
Settings menu
 Check engine oil level–fill oil to the max level when the vehicle
is at operating temperature
 Set clock and date to local time/date using correct format
Front Lid Inspection
 Verify front lid opens and closes smoothly
 Voice Activation (if equipped): Press the “Talk” button and
verify several commands
 Install wheel bolt cover removal tool from PDI kit and wheel
lock key into trunk tool kit
On-Hoist Inspection
 Navigation location (if equipped): Set dealership location (for
following back to dealership during road test)
 Check underside of vehicle for fluid leaks and loose components
Exterior
 Test windshield washers for aim and function
 Turn on headlights and test headlamp washers (if equipped)
 Test exterior lighting functions
Effective 8-20-2014-US
Version 1.3
 Check steering, boots, brake system, hoses, tires and wheels
for damage
 Remove transport suspension blocks (Please follow ELSA
instruction)
1 of 2
PERFECT DELIVERY INSPECTION (PDI)
2015 R8 Coupe/R8 Spyder | Audi Technician Report
On-Hoist Inspection (continued)
Road Test (continued)
 Inspect wheel bolts for proper torque using torque wrench
 Verify rear spoiler functionality
 Install wheel bolt covers and center caps as supplied
 Climate control: Check all functions and ensure proper A/C
cooling
 If a known “sold” unit, set to appropriate Normal Load Condition. See separate “2015 Normal Load Condition Tire Pressure
Table” posted on ServiceNet. If going to stock, set to maximum
recommended tire pressures listed on the B-pillar doorjamb,
and store tire pressure values in Car/System menu
Road Test
 Check for squeaks, rattles and wind noise
 Test operation of folding power top (Spyder)
 Test power wind deflector (Spyder)
 Seat heating (if equipped): Inspect for proper operation
 Navigation function (if equipped): Activate NAV and follow
directions back to dealership
 Parking brake: Apply and verify hold and release
Post-Road Test Inspection
 Interrogate fault memory using the Scan Tool and print Diagnostic Log
 Record final mileage on checklist and sign checklist
 Verify operation of Audi parking system advanced with rear
view camera (if equipped)
 Verify engine performance and acceleration. Listen for abnormal noise/vibrations
 Verify operation of acoustic park assist feature (if equipped)
 Verify transmission operation, including shift paddles
 Check steering/tire alignment
 Test drive vehicle applying brakes several times (at least 4
times) at 20 mph (35 km/h) to clean brake rotors. Check for
abnormal noise/vibration/pulsation
 Ensure the yellow tire pressure tag is installed on the steering
wheel
If Vehicle is for Showroom Display/Inventory Storage or Demo
Use
 Install showroom charger to ensure battery remains charged at
all times
 Apply Inventory Maintenance Sticker
 Install standard wiper blades (if not already installed)
 Verify quality of radio reception in AM/FM/SAT bands
 Verify cruise control functions
Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Last 8 of VIN
Effective 8-20-2014-US
Version 1.3
Technician Signature
Completion Date
2 of 2