TSB002723

T-SB-0027-23
Rev1
May 26, 2023
Tire Positioning Before New Vehicle Delivery
Service
Category
General
Section
Pre-Delivery Service
Market USA
Applicability
YEAR(S)
MODEL(S)
2024
4Runner, 86, bZ4X, Camry,
Camry HV, Corolla, Corolla
Cross, Corolla Cross HV,
Corolla Hatchback, Corolla
HV, Crown, GR Corolla,
Grand Highlander, Grand
Highlander HV, Highlander,
Highlander HV, Mirai, Prius,
Prius Prime, RAV4, RAV4
HV, RAV4 Prime, Sequoia
HV, Sienna HV, Supra,
Tacoma, Tacoma HV,
Tundra, Tundra HV, Venza
HV
ADDITIONAL INFORMATION
REVISION NOTICE
August 28, 2023 Rev1:
 Applicability has been updated to include 2024 model year 86, bZ4X, Highlander, Highlander
Hybrid, Tacoma, and Tacoma Hybrid vehicles.
Any previous printed versions of this bulletin should be discarded.
Introduction
During the manufacturing process, tires are mounted on the vehicle as matched sets to help
reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle
delivery, it is important that the tires remain on the vehicle in the same location and in the same
direction of rotation.
Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the
same location on the vehicle.
© 2023 Toyota Motor Sales, USA
Page 1 of 2
T-SB-0027-23
Rev1
May 26, 2023
Page 2 of 2
Tire Positioning Before New Vehicle Delivery
Warranty Information
OP CODE
DESCRIPTION
TIME
OFP
T1
T2
N/A
Not Applicable to Warranty
–
–
–
–
Tire Positioning Procedure
1. Mark the tire installation position on the inward facing tire sidewall.
Example: Front Right = FR, Front Left = FL, Rear Right = RR, Rear Left = RL
2. Install the original tires on the NEW or refinished wheels with the marked side facing inward.
3. Balance the tire/wheel assemblies.
4. Place the tire/wheel assemblies on the vehicle in the marked positions.
NOTE
Torque the wheel fasteners to the proper torque value in sequence.
© 2023 Toyota Motor Sales, USA