S2319000007
Service Bulletin Details
Public Details for: S2319000007
Squeak noise from dash area when turning the steering wheel.
- 2024 - 2023 - 2022 - 2021 - 2020 - 2019 - 2018 -
Models from 2024
| 2024 JEEP WRANGLER |
Models from 2023
| 2023 JEEP GLADIATOR |
| 2023 JEEP WRANGLER |
Models from 2022
| 2022 JEEP GLADIATOR |
| 2022 JEEP WRANGLER |
Models from 2021
| 2021 JEEP GLADIATOR |
| 2021 JEEP WRANGLER |
Models from 2020
| 2020 JEEP GLADIATOR |
| 2020 JEEP WRANGLER |
Models from 2019
| 2019 JEEP WRANGLER |
Models from 2018
| 2018 JEEP WRANGLER |
Case Number: S2319000007 Release Date: September 2023 Symptom/Vehicle Issue: Squeak Noise From Dash Area When Turning The Steering Wheel. Discussion: Inspect the steering shaft bearing installed in the front bulkhead. The bearing is marked left-hand drive (LHD) or right-hand drive (RHD) to identify its application. If the bearing is not a correct match for the vehicle, a noise may result when turning the steering wheel. Replace the bearing if it does not match the application. See figures below. This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Online does not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear to be similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the appropriate course of action. Contact STAR Center, or your Technical Assistance Center Via TechConnect, eCONTACT or Service Library entry if no solution is found. Stellantis US LLC Version 4.5 07/22/2022