A0123942072046_1

Service Bulletin Details

Public Details for: A0123942072046_1

This bulletin provides information for when the mil is illuminated and P060C00 is stored in the ecm.


- 2023 -

Technical Service Bulletin
01 MIL on - DTC P060C00 is stored in the ECM
01 23 94 2072046/1 November 17, 2023.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
Q7, SQ7, Q8,
SQ8, and RS Q8
2023
All
Not Applicable
Condition
Customer states:
The MIL is illuminated.
Workshop findings:
The following DTC is stored in the engine control module ECM, -J623- (address word 0001):
DTC P060C00 (Internal Control Module Main Processor Performance) with symptom code 30924.
Technical Background
This is a rare occurrence caused by the sensitivity of diagnostics software in the ECM, -J623- (address word
0001).
Production Solution
New software in the ECM -J623- (address word 0001) addresses the condition.
Service
This TSB replaces Pending Service Solution (PSS) TSB 2067767 MIL / EPC light on, various warnings or poor
performance - P060C00 stored in ECM - V6 TFSI for MY23 Q7 and Q8 models.
Please refer to (PSS) TSB 2067767 MIL / EPC light on, various warnings or poor performance - P060C00 stored
in ECM - V6 TFSI for MY22 Q7 and Q8 models.
SVM Update Instructions
1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions.
2. Update the ECM, J623 (address word 0001) using the SVM action code as listed in the table below, if
necessary:
Model
Old Software
Part Number
© 2023 Audi of America, Inc.
Internal
Old Software
Version
New Software Part
Number
New Software
Version
(or higher)
(or higher)
SVM Code
Input
Page 1 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
MY23 Q7
4M0907559T
0001
4M0907559T
0002
01A255
MY23 Q8
4M8907559R
0001
4M8907559R
0002
01A255
Warranty
Claim Type:
• 110 Up to 48 Months/50,000 Miles
• G10 for CPO Covered Vehicles – Verify Owner.
• If the vehicle is outside of any warranty, this Technical Service Bulletin is
informational only.
Service Number:
2470
Damage Code:
0039
Labor Operations:
Software Update (Includes checking for DTCs)
0151 0060
Max 60 TU
Diagnostic Time:
GFF
0150 0010
See SRT with
associated
operations
Road test prior to the service procedure
No allowance
0 TU
Road test after the service procedure
No allowance
0 TU
Claim Comment:
As per TSB 2072046/1
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Required Parts and Tools
Tool Number
Tool Description
VAS 6160/VAS 6150
VAS tester with the current version of ODIS (Windows 10)
Additional Information
The following Technical Service Bulletin(s) will be necessary to complete this procedure:
• TSB 2011732: 00 Software Version Management (SVM), operating instructions.
All part and service references provided in this TSB (2072046) are subject to change and/or removal. Always
check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the
Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
© 2023 Audi of America, Inc.
Internal
Page 2 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
©2023 Audi of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites without the prior expressed written permission of the
publisher.
© 2023 Audi of America, Inc.
Internal
Page 3 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.