A0123982071770_3

Service Bulletin Details

Public Details for: A0123982071770_3

This bulletin provides information for when the mil is illuminated, dtc P240700 leak detection pump current fluctuating; q5 phev


- 2023 - 2022 -

Models from 2023
2023 AUDI Q5 PHEV
Models from 2022
2022 AUDI Q5 PHEV
Technical Service Bulletin
01 MIL on, DTC P240700 Leak Detection Pump Current Fluctuating; Q5 PHEV
01 23 98 2071770/3 November 22, 2023. Supersedes Technical Service Bulletin Group 01 number 23-89 dated
October 30, 2023 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
Q5 e quattro
2022 – 2023
All
Not Applicable
Condition
REVISION HISTORY
Revision
Date
Purpose
3
-
Revised header (Add Model Year, 2022 Q5 PHEV)
Revised SVM table (Added Model Year, 2022)
2
10/27/2023
Revised title (added Q5 PHEV for clarity)
Revised Condition (Add Q5 PHEV to SVM table for clarity)
1
10/16/2023
Initial publication
Customer states:
• The MIL is illuminated.
Workshop findings:
The following DTC may be stored in the Engine Control Module, -J623- (address word 0001).
• DTC P2407 (P240700) “EVAP emission control system leakage diagnosis pump current fluctuating”.
No other relevant event memory entry is logged in the engine control unit.
Technical Background
OBD diagnostics too sensitive.
Production Solution
New software in the Engine control module, -J623- (address word 0001) addressed the condition.
Service
For Model Years 2022 and 2023 Q5 PHEB vehicles, this TSB replaces Pending Service Solution (PSS) TSB
2066675: 01 PSS MIL on DTC P240700 Evap leak detection pump circuit.
© 2023 Audi of America, Inc.
Internal
Page 1 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions.
2. Update the -J623- (0001) using the SVM action code as listed in the table below, if necessary:
Model
Q5
PHEV
Old Software Part
Number
Old Software
Version
New Software Part
Number
New Software
Version
(or higher)
(or higher)
80A.906.259.AA
001
80A.906.259.AA
0002
80A.906.259.AD
0001
80A.906.259.AD
0002
MY2022
Q5
PHEV
SVM Code
Input
01A320
MY2023
Warranty
Claim Type:
• 110 Up to 48 Months/50,000 Miles.
• G10 for CPO covered Vehicles – Verify Owner.
• If the vehicle is outside of any warranty, this Technical Service Bulletin is
informational only.
Service Number:
2048
Damage Code:
0040
Labor Operations:
Software Update (Includes checking for
DTCs)
0151 0000
Time stated on the
diagnostic protocol
(Max 50 TU)
Diagnostic Time:
GFF
No allowance
0 TU
Road test prior to the service
No allowance
0 TU
Road test after the service
No allowance
0 TU
Claim Comment:
As per TSB 2071770/2
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Required Parts and Tools
Tool Number
© 2023 Audi of America, Inc.
Internal
Tool Description
Page 2 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
VAS 6160/VAS 6150
VAS tester with the current version of ODIS (Windows 10)
Additional Information
All part and service references provided in this TSB (2071770) are subject to change and/or removal. Always
check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the
Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2023 Audi of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites without the prior expressed written permission of the
publisher.
© 2023 Audi of America, Inc.
Internal
Page 3 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.