No. 160-23-2

9
Service
WPN9
Technical Information
ENU160/23
Checklist
Checklist:
Work step:
The checklist is an aid for carrying out the campaign and does not replace the TI information.
Completed:
1. Charger set to 14.8 V and charging mode?
2. Internet connection for PIWIS Tester active?
3. USB stick prepared with the correct PIUS part number?
4. Select Guest account from the central display (PCM) and activate Privacy mode?
5. Central computer control unit programmed?
Read the warnings displayed on the Tester!
6. Fault memory deleted?
7. Integration test error-free?
8. Is the battery charger set to a charge voltage of 14.4 V?
9. Campaign entered in the Warranty and Maintenance logbook?
Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a
discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed.
© 2023 Porsche Cars North America, Inc.
Nov 3, 2023
AfterSales