PIC5257C
Service Bulletin Details
Public Details for: PIC5257C
Service stability message with code U0710
Models from 2013
2013 BUICK LACROSSE |
2013 BUICK REGAL |
2013 CADILLAC SRX |
2013 CHEVROLET CAMARO |
2013 CHEVROLET CRUZE |
2013 CHEVROLET EQUINOX |
2013 GMC TERRAIN |
Models from 2012
2012 BUICK LACROSSE |
2012 BUICK REGAL |
2012 CADILLAC SRX |
2012 CHEVROLET CAMARO |
2012 CHEVROLET CRUZE |
2012 CHEVROLET EQUINOX |
2012 GMC TERRAIN |
Models from 2011
2011 BUICK LACROSSE |
2011 BUICK REGAL |
2011 CADILLAC SRX |
2011 CHEVROLET CAMARO |
2011 CHEVROLET CRUZE |
2011 CHEVROLET EQUINOX |
2011 GMC TERRAIN |
Models from 2010
2010 BUICK LACROSSE |
2010 CADILLAC SRX |
2010 CHEVROLET CAMARO |
2010 CHEVROLET EQUINOX |
2010 GMC TERRAIN |
File in Section: Service Bulletin - Bulletin No.: PIC5257C Date: July, 2013 PRELIMINARY INFORMATION Subject: Diagnostic Tip - Service Stability Message With Code U0710 Models: 2011 - 2013 Buick Regal 2010 - 2013 Buick LaCrosse 2010 - 2013 Cadillac SRX 2010 - 2013 Chevrolet Camaro, Equinox 2011 - 2013 Chevrolet Cruze 2010 - 2013 GMC Terrain This PI was superseded to update model years. Please discard PIC5257B. The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI. Condition/Concern A customer may notice a Service Stability message in the DIC. After further investigation you may find DTC U0710 set by the Steering Angle Sensor. It should be noted that the Steering Angle Sensor is incorrectly setting this U-code, and it should be setting C0710 code instead. Recommendation/Instructions Follow the published diagnostics for DTC C0710 and NOT DTC U0710. Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.