PIC5598H

Service Bulletin Details

Public Details for: PIC5598H

Guidelines for nj1 power steering powerpack


- 2013 - 2012 - 2011 - 2010 -

File in Section:
Service Bulletin
Bulletin No.:
Date:
PIC5598H
September, 2012
PRELIMINARY INFORMATION
Subject:
Guidelines For NJ1 Power Steering Powerpack (Module) Replacement And Parts
Restriction Instructions
Models:
2011 - 2013 Chevrolet Cruze
2010 - 2013 Chevrolet Equinox
2011 - 2013 Chevrolet Volt
2010 - 2013 Buick LaCrosse
2011 - 2013 Buick Regal
2012 - 2013 Buick Verano
2010 - 2013 GMC Terrain
2013 Chevrolet Malibu Eco
This PI was superseded to update DTC information, model and model years. Please discard
PIC5598G.
The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.
Condition/Concern:
Condition: A technician may question if he should replace an Electronic Power Steering Gear Assembly or
Powerpack (Module) Only. The following Powerpack (module) part numbers 13286690, 13365402, 13394025 and
19117588 are on restriction through the GM TAC (Technical Assistance Center). If there is no High Speed LAN
Communication or Data cannot be accessed with GDS2 a New Power Steering Gear Assembly will be needed.
Recommendation/Instructions:
The following DTCs are the only reason it would be necessary to replace an NJ1 Powerpack (Module).
C0475_00 – Electric Power Steering Motor Circuit Fault
For other DTCs please review the latest version of PIT5063A for additional diagnostic tips.
Note: These codes indicate that the Powerpack (Module) should be replaced.
If it is necessary to replace the Powerpack (Module) check the white tag on the black plastic cover of the Powerpack
that will have a 4 digit code 1 letter followed by 3 numbers.(example E103) This code is necessary to order correct
replacement part. Contact General Motors Technical Assistance to confirm diagnosis and order a new Powerpack
(Module). One of the part numbers listed below will be needed.
Code
Part Number
E103
13286690
E121
13365402
E131
13394025
V102
19117588
2742257
Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is
resolved without completing every step, the remaining steps do not need to be performed.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.