A4823582072303_1

Service Bulletin Details

Public Details for: A4823582072303_1

This bulletin provides information when the steering system cannot be "started".


- 2024 - 2023 -

Technical Service Bulletin
48 Steering system cannot be "started"
48 23 58 2072303/1 December 13, 2023.
Model(s)
Year
A6, A6 allroad,
S6, RS 6, A7,
S7, RS 7, A8,
S8, Q5, Q5 e
quattro, Q5
2023 – 2024
Sportback, SQ5,
SQ5 Sportback,
Q7, SQ7, Q8,
SQ8, and RS Q8
VIN Range
Vehicle-Specific Equipment
All
Not Applicable
Condition
Customer states:
No Customer complaint is noted; it is found during diagnostic work.
Workshop findings:
The newly installed steering system cannot be “started”.
Technical Background
Not applicable.
Production Solution
Gradual introduction in production.
Service
SVM Update Instructions
1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions.
2. Update the J500 (address word 0044) using the SVM action code as listed in the table below, if necessary:
Model
A6, A7, A8,
Q5, Q7, Q8
Old Software Part
Number
4N0909144H
© 2023 Audi of America, Inc.
Internal
Old Software
Version
0511
New Software Part New Software
Number
Version
(or higher)
(or higher)
4N0909144H
0512
SVM Code
Input
44A040
Page 1 of 2
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
Warranty
Claim Type:
• 110 Up to 48 Months/50,000 Miles.
• G10 for CPO Covered Vehicles – Verify Owner.
• If the vehicle is outside of any warranty, this Technical Service Bulletin is
informational only.
Service Number:
4835
Damage Code:
0040
Diagnostic Time:
Software Update (Includes checking for
DTCs)
0150 0000
Time stated on the
diagnostic protocol
(Max 40 TU)
Road test prior to the service procedure
No allowance
0 TU
Road test after the service procedure
No allowance
0 TU
Claim Comment:
As per TSB 2072303/1
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Additional Information
All part and service references provided in this TSB (2072303) are subject to change and/or removal. Always
check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the
Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2023 Audi of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites without the prior expressed written permission of the
publisher.
© 2023 Audi of America, Inc.
Internal
Page 2 of 2
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.