24-BE-003G

GROUP
BODY ELECTRICAL
DATE
Technical Service Bulletin
SUBJECT:
JANUARY 2024
NUMBER
24-BE-003G
MODEL(S)
SEE BELOW
HEAD LAMP ASSEMBLY SERVICE PARTS REPLACEMENT
Description: This bulletin provides information on the Integrated LED Control Unit (ILCU) which is now
available as a separate service part from the head lamp assembly for certain G70 (IK), GV70 (JK1),
GV70 Electrified (JK1a EV), and GV80 (JX1) vehicles. For G70 (IK) vehicles, the ILCU is called LED
Drive Module (LDM).
In cases where the head lamp assembly needs replacement due to exterior damage such as a cracked
lens, broken housing, etc., it is recommended to replace the head lamp sub-assembly only (not the
entire head lamp assembly) and reuse the existing ILCU or LDM if no problem is found with it.
Applicable Vehicles (Certain):
• 2022MY and newer G70 (IK)
• 2022MY and newer GV70 (JK1)
• 2023MY and newer GV70 Electrified (JK1a EV)
• 2021MY and newer GV80 (JX1)
Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service
Advisors, Technicians, Body Shop Manager, Fleet Repair
SUBJECT:
HEAD LAMP ASSEMBLY SERVICE PARTS REPLACEMENT
Parts Information:
Service Part:
Model
LH/RH
Head Lamp Assembly
Sub-assembly
LH
92101-*****
92103-*****
RH
92102-*****
92104-*****
Head Lamp with ILCU
Head Lamp without ILCU
(Rubber cover included)
G70 (IK)
GV70 (JK1)
GV70 Electrified
(JK1a EV)
GV80 (JX1)
ILCU/LDM*
92170-*****
92180-*****
92183-*****
ILCU/LDM
NOTE 1: Confirm the correct part number of head lamp assembly for each model in the Parts
Catalog. Use Parts Catalog for full part numbers.
NOTE 2: ILCU/LDM part numbers may be different for each model. Future part numbers will all start
with 92183.
Location of Integrated LED Unit (ILCU) or LED Drive Module (LDM):
GV70 (JK1)
GV70 Electrified (JK1a EV)
GV80 (JX1)
G70 (IK): LDM
Backside
Underside
Backside
TSB #: 24-BE-003G
Page 2 of 4
SUBJECT:
SUBJECT:
HEAD LAMP ASSEMBLY SERVICE PARTS REPLACEMENT
Warranty Information:
Model
Op. Code
G70 (IK)
GV70 (JK1)
GV70 Electrified
(JK1a EV)
GV80 (JX1)
Operation
Op. Time
92110R00
Head Lamp Sub-Assy
Replacement (LH)
92110R0R
Head Lamp Sub-Assy
Replacement (RH)
92110R0B
Head Lamp Sub-Assy
Replacement
(Both sides)
Causal P/N
92101-*****
Refer to
WEBLTS for
current LTS
time
92102-*****
92101-*****
92102-*****
NOTE 1: Normal warranty applies.
NOTE 2: Refer to the latest Digital Documentation Policy for repair validation requirements.
NOTE 3: The incident parts are subject to callback through the normal Warranty Technical Center
(WTC) parts return process. Claim is subject to debit if the part is not returned.
NOTE 4: If a part is found in need of replacement while performing this TSB and the affected part is
still under warranty, submit a separate claim using the same repair order. If the affected part is out of
warranty, submit a Prior Approval request for goodwill consideration prior to performing the work.
NOTE 5: Please select the appropriate nature and cause codes that best justify the reason for repair.
NOTE 6: Use Parts Catalog for full causal part numbers.
Service Procedure:
STUI
This TSB includes Repair validation photos. Refer to the latest Warranty Digital Documentation
Policy for requirements.
Follow the steps below when replacing a head lamp sub-assembly. Reuse the ILCU or LDM if no
problem is found with it.
1.
Remove the head lamp assembly (A).
Refer to the Shop Manual:
• G70 (IK): Body Electrical System >
Lighting System > Head Lamps >
Repair procedures
• GV70 (JK1): Body Electrical System >
Lighting System > Head Lamps >
Removal & Installation
• GV70 EV (JK1a EV): Body
(Interior/Exterior/Electrical) > Light &
Vision System > Head Lamps >
Removal and Installation
• GV80 (JX1): Body Electrical System >
Lighting System > Head Lamps >
Repair procedures
TSB #: 24-BE-003G
A
Page 3 of 4
SUBJECT:
SUBJECT:
2.
HEAD LAMP ASSEMBLY SERVICE PARTS REPLACEMENT
Remove the ILCU/LDM (B) from the head lamp
assembly.
i
Information
B
Save the screws for reattaching the
ILCU/LDM.
3.
Disconnect the ILCU/LDM connector (C) and
remove the ILCU/LDM.
C
4.
Remove the rubber cover (D) on the new head
lamp sub-assembly.
D
5.
Connect the ILCU/LDM (E) to the new head
lamp sub-assembly and reuse the screws
saved during removal.
E
7.
Reinstall all removed components in reverse
order of disassembly.
8.
Procedure is complete.
TSB #: 24-BE-003G
Page 4 of 4
SUBJECT: