No. 8-19
Service Bulletin Details
Public Details for: No. 8-19
Installation and conversion instructions for the 911 - projector ud1
- 2024 - 2023 - 2022 - 2021 - 2020 - 2019 -
Models from 2024
2024 PORSCHE 911 |
Models from 2023
2023 PORSCHE 911 |
Models from 2022
2022 PORSCHE 911 |
Models from 2021
2021 PORSCHE 911 |
Models from 2020
2020 PORSCHE 911 |
Models from 2019
2019 PORSCHE 911 |
Installation and Conversion Instructions 911 (992) 8 / 19 ENU 9600 9 PORSCHE Projector UD1 Revision: This bulletin replaces bulletin Group 9 8/19, dated June 17, 2019. Model Year: As of 2019 Cause: Retrofitting Note: The PORSCHE projector is a small lighting element that projects the word “PORSCHE” onto the floor as soon as the relevant vehicle door is opened. Figure 1 Parts Info: 9Y0.044.911 1x Set (2 units) projector “PORSCHE” Figure 2 -1- 992.088.945 1x Set (2 units) “Roughroads” projector Figure 2 -1- The following parts must also be ordered, screws on door panel, please observe the guidelines for mounting positions. N 908.249.02 4x Screws on door panel Tequipment Jan 5, 2024 Page 1 of 3 9 911 (992) 9600 ENU 8 / 19 Installation and Conversion Instructions Figure 2 Tool: Work Procedure: P90999 - PIWIS Tester 4 Information Since the size and shape of the PORSCHE projector differs from the door warning light installed in the vehicle, the door panels must be removed. 1 Jan 5, 2024 Page 2 of 3 Removing door panels 1.1 Remove door panels on driver’s and passenger’s side. Workshop Manual 'Removing and installing front door panel' 1.2 Remove door guard light. 1.3 Insert PORSCHE projector “at the bottom” so that the retaining lugs at the left and right Figure 3 -1- are engaged securely. Clip in projector “at the top” and make sure that the retaining lugs at the left and right Figure 3 -2- engage. Check that the projector is installed securely. Tequipment Installation and Conversion Instructions 1.4 911 (992) 8 / 19 ENU 9600 9 Install door panels on driver’s and passenger’s side. Workshop Manual 'Removing and installing front door panel' Figure 3 2 Follow-up actions 2.1 Labor time: Read out and erase the fault memory. Workshop Manual 'Fault memory for on-board diagnosis' Install 96162440 PORSCHE projector. Includes: Removing and installing door panels on driver’s and passenger’s side, reading out and erasing fault memory Labor time: 110 TU Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed. © 2024 Porsche Cars North America, Inc. Tequipment Jan 5, 2024 Page 3 of 3