MAS003824

TECHNICAL SERVICE OPERATIONS
MAS003824_A RU 24-01
RAPID UPDATE
FROM: Maserati TSO
TO: Maserati Network
Rapid Update 663
Grecale – ICS Software Update
ATTENTION! This bulletin supersedes MAS003824 RU 23-61 released on October 19,2023, and has been
updated to extend the vin list and include both MY 23 and MY24 Grecale. Please discard/remove all
copies of the previous bulletin.
DATE: JANUARY 23, 2024
Certain Maserati Grecale (M182) MY23 MY24 listed in MODISCS+ are involved in a Rapid
Update to update the Integrated Center Stack (ICS) software.
In rare instances, there could be a sensitivity issue and touch screen malfunction associated
with the ICS module. This update is necessary to enhance the sensitivity of the touch screen.
We remind you that all the Rapid Updates must be performed within the first workshop visit,
regardless of the Mandatory setting set in Modis, as required by Maserati policies.
Also, for vehicles in Stock Dealer / PDI, it is necessary to carry out all action operations before
delivery to the end customer, as required by the White Book and explicitly reported in the Predelivery checklist.
Please read and review this bulletin first before ordering parts and/or starting the procedure.
Contact your Regional AfterSales Manager (RAM) or the Technical Support Helpdesk if you
have any questions.
Thank You for your continued support and cooperation.
Maserati North America
Aftersales Dept.
© 2024 Maserati North
America Aftersales
www.maseratiusa.com
MAS003824_A
All rights reserved. Reproduction or translation in
whole or in part is not permitted without
authorization from the publisher. Printed in USA
Page 1 of 2
All images shown in this bulletin are for illustrative purposes only
1. Always check ModisCS+ to see if the vehicle is involved in this action and if it has not been
previously performed.
2. Before proceeding, please ensure that the Engine is OFF.
3. Connect a battery maintainer to the 12V battery (It is recommended to always use the
E-XTEQ MAXIMUS to maintain minimum voltage and current draw requirements)
4. Connect the EVO to the vehicle, ensure that battery voltage is around 12.5V then select ICS
► ECU Programming and follow the prompts.
Software version to be installed (or newer)
SW Source
Market
F188 Source
SW Target
F188 Target
5.6
ROW
670297896
5.8
673015759
6.2
ROW
670299122
6.3
673015761
1. After ECU programming, perform BCM – Procedures – PROXI Alignment.
2. Operation complete.
Warranty Claim
Fill in the relative Warranty Claims as follows:
Description
Code
Rapid Update Number
663
Warranty Code
23
Fault Code
063
Component Code
Operation Code
© 2024 Maserati North
America Aftersales
www.maseratiusa.com
MAS003824_A
8.71.240
8.71.240.F (0,20 h)
All rights reserved. Reproduction or translation in
whole or in part is not permitted without
authorization from the publisher. Printed in USA
Page 2 of 2
TECHNICAL SERVICE OPERATIONS
Procedure