0212022032094

Technical Service Bulletin
02 Transmission warning message in cluster (DTC P0603 in TCM)
02 12 02 2032094/1 December 6, 2012.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
2012-2013
All
CVT Transmission
A4
A5 Cabriolet
A6
Condition
Customer may report transmission warning light comes on. No drivability/starting concerns. GFF scan shows fault
code- P060300 (Control Module Malfunctioning, Sporadic), stored in the Transmission control module (02).
Technical Background
The entry is caused by a too sensitive diagnosis in the gearbox control unit.
This does not affect the driving characteristics.
Production Solution
Not applicable.
Service
No repair is available at this time.
1. Do not perform any repairs. Any repairs for this concern will be denied.
2. Instruct the customer that this condition is known, and a solution is under development.
For payment processing Guided fault Finding Logs must be documented identifying that the applicable fault
codes were present and have been cleared. All claims are subject for review.
Page 1 of 2
© 2012 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights
of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without
the prior expressed written permission of the publisher.
Technical Service Bulletin
Warranty
Claim Type:
Use applicable claim type. If vehicle is outside any warranty, this Technical Service
Bulletin is informational only.
Service Number:
3730
Damage Code:
0039
Diagnostic Time:
GFF Check faults, verify codes listed are present 0150 0000
Time stated on
and clear faults.
diagnostic
protocol (Max 40
TU)
Road test prior to service procedure
No allowance
0 TU
Road test after service procedure
No allowance
0 TU
Technical diagnosis at dealer’ s discretion
(Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details)
Claim Comment:
As per TSB #2032094/1
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Additional Information
All parts and service references provided in this TSB are subject to change and/or removal. Always check with
your Parts Department and service manuals for the latest information.
Page 2 of 2
© 2012 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights
of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without
the prior expressed written permission of the publisher.