4012262024318
Service Bulletin Details
Public Details for: 4012262024318
Clicking noise from wheel bearing
- 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - 2004 -
Models from 2011
| 2011 AUDI A6 |
Models from 2010
| 2010 AUDI A4 |
| 2010 AUDI A5 |
| 2010 AUDI A5 CABRIOLET |
| 2010 AUDI A6 |
| 2010 AUDI A8 |
| 2010 AUDI Q5 |
Models from 2009
| 2009 AUDI A4 |
| 2009 AUDI A5 |
| 2009 AUDI A6 |
| 2009 AUDI A8 |
| 2009 AUDI Q5 |
Models from 2008
| 2008 AUDI A5 |
| 2008 AUDI A6 |
| 2008 AUDI A8 |
Models from 2007
| 2007 AUDI A6 |
| 2007 AUDI A8 |
Models from 2006
| 2006 AUDI A4 |
| 2006 AUDI A6 |
| 2006 AUDI A8 |
Models from 2005
| 2005 AUDI A4 |
| 2005 AUDI A6 |
| 2005 AUDI A8 |
Models from 2004
| 2004 AUDI A8 |
Technical Service Bulletin 40 Clicking noise from wheel bearing 40 12 26 2024318/2 September 26, 2012. Supersedes Technical Service Bulletin Group 40 number 10 – 13 dated December 21, 2010 for reasons listed below. Model(s) Year VIN Range A4 (B7) 2005 – 2006 All A4 (B8) 2009 All A4 (B8) 2010 000001 – 017859 A5 (B8) 2008 – 2009 All A5 (B8) 2010 000001 – 008561 A5 Cabriolet (B8) 2010 All A6 (C6) 2005 – 2011 All A8 (D3) 2004 – 2010 All Audi Q5 (B8) 2009 All Audi Q5 (B8) 2010 000001 – 012381 Vehicle-Specific Equipment Not Applicable Condition REVISION HISTORY Revision Date Purpose 2 - Revised Service (Updated Repair instructions) 1 12/21/2010 Original publication Clicking or clacking noise when maneuvering or parking. Technical Background Normal driving dynamics may cause microscopic movements between the wheel bearing and wheel bearing housing. Production Solution Not applicable. © 2012 Audi of America, Inc. Page 1 of 4 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Service 1. Remove any corrosion and dirt from the wheel bearing housing and the wheel bearing. 2. Using a brush, apply a thin coat of paste G 052109A2 on the wheel bearing housing as shown in Figure 1. Make sure not to apply any paste on the threads. Figure 1. Area to apply paste. Tip: Wheel bearings replaced for this concern will not be reimbursed under warranty. © 2012 Audi of America, Inc. Page 2 of 4 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Warranty Claim Type: Use applicable claim type. If vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 4057 Damage Code: 0010 Labor Operations: Remove and install single hub with bearing 4067 1900 A8 (D3) - 190 TU A6 (C6) - 130 TU A4 (B7) - 110 TU A4, A5, Audi Q5 (B8) 130 TU -ORRemove and install both hubs with bearings 4067 2000 A8 (D3) - 330 TU A6 (C6) - 220 TU A4 (B7) - 220 TU A4, A5, Audi Q5 (B8) 220 TU Diagnostic Time: Modify wheel bearing(s) 4067 4999 5 TU GFF No allowance 0 TU Road test prior to service procedure 0121 0002 10 TU Road test after service procedure 0121 0004 10 TU Technical diagnosis at dealer’s discretion (Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details) Claim Comment: As per TSB #2024318/2 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. © 2012 Audi of America, Inc. Page 3 of 4 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Required Parts and Tools Part Number Part Description Quantity G 052109A2 Paste 1 Additional Information All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information. © 2012 Audi of America, Inc. Page 4 of 4 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.