A9124792053028_5
Service Bulletin Details
Public Details for: A9124792053028_5
This bulletin provides information when the top view camera setting changes to graphic view intermittently after startup with mib2.
Models from 2018
2018 AUDI A4 |
2018 AUDI Q5 |
2018 AUDI Q7 |
2018 AUDI S4 |
2018 AUDI SQ5 |
Models from 2017
2017 AUDI A4 |
2017 AUDI Q7 |
2017 AUDI S4 |
Technical Service Bulletin 91 MIB2 High: Top view camera setting changes to graphic view intermittently after startup 91 24 79 2053028/5 February 23, 2024. Supersedes Technical Service Bulletin Group 91 number 20-31 dated November 10, 2020 for reasons listed below. Model(s) Year A4, A4 allroad, S4, and Q7 2017 – 2018 Q5, and SQ5 2018 VIN Range Vehicle-Specific Equipment All Top view camera Condition REVISION HISTORY Revision Date Purpose 5 - Revised Service (updated note about SD Creator) 4 11/10/2020 Revised title Revised header (Added vehicle options) Revised Service (Updated procedure and added note about MY18 vehicles) Revised Additional Information (Added new reference) 3 09/13/2019 Revised header (Corrected Elsa display issue) Revised Service (Removed update table) Customer states: • When the reversing camera is active showing the Top view camera to the right, the display changes intermittently at startup from camera view to graphics view. Compare the images to the right (Figures 1 and 2). Figure 1. Correct camera view. © 2024 Audi of America, Inc. Internal Page 1 of 4 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Figure 2. Incorrect graphics view. Technical Background The software needs to be updated. The optimized software will correct the view switch. Production Solution New software in the information electronics control module 1, J794 (address word 005F) addressed the condition. Service Required equipment: • ODIS Tester. • SVM code. • MIB2 High Scale Software update on SD Card (Download the software from MirrorServer using the SD Creator Program or, if not available for download, order the update medium from parts with the part number listed in Required Parts and Tools). Time to complete update: • Approximately 30-60 minutes (includes 20-50 minutes for the software update and 10 minutes for the SVM work). Service work: • Update the MIB2 High infotainment system using either Method 1 or Method 2 according to TSB 2047576: 91 MIB2 High Software Update Instructions (PR Code 7UG) and use SVM code MHI2QUS5087. Method 1: Automated update using ODIS. Method 2: Manual update due to SVM code or Server issues. Vehicle SD Creator Part Number SVM Code A4, A5, Q5, and Q7 4M0906961BN MHI2QUS5087 © 2024 Audi of America, Inc. Internal Page 2 of 4 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin This update is not applicable to MY18 vehicles produced in or after May 2018! Warranty Claim Type: • 110 up to 48 Months/50,000 Miles. • G10 for CPO Covered Vehicles – Verify Owner. • If the vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 9196 Damage Code: 0039 Labor Operations: Software Update 0151 0000 See TSB 2047576 Diagnostic Time: GFF No allowance 0 TU Road test prior to service procedure No allowance 0 TU Road test after service procedure No allowance 0 TU Claim Comment: As per TSB 2053028/5 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Required Parts and Tools Model SD Card Quantity A4, A5, Q5, and Q7 4M0906961BN 01 (Shop tool) Additional Information The following Technical Service Bulletin will be necessary to complete this procedure: • TSB 2011732, 00 Software Version Management (SVM), operating instructions. • TSB 2047812, 00 SD Creator: How to setup and use the SD Creator for obtaining vehicle software updates via the MirrorServer. • TSB 2047576, 91 MIB2 High Navigation Software Update Instructions (PR Code 7UG). © 2024 Audi of America, Inc. Internal Page 3 of 4 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin All part and service references provided in this TSB (2053028) are subject to change and/or removal. Always check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair. ©2024 Audi of America, Inc. All rights reserved. The information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites without the prior expressed written permission of the publisher. © 2024 Audi of America, Inc. Internal Page 4 of 4 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.