No. 176-23

Service
Technical Information
176/23 ENU
WPR1
3
WPR1 - Replacing Transfer Box (Workshop Campaign)
Model Line:
Macan (95B)
Model Year:
2023
Concerns:
Transfer box
Cause:
Due to a supplier error, there is a possibility that a transfer box installed on the affected
vehicles might not meet the required specifications.
If this is the case, oil leakages can occur on the transfer box.
Action:
Replace transfer gear.
Affected
Vehicles:
Only vehicles assigned to the campaign (see also PCSS Vehicle Information).
Installation
Position:
Installation position of transfer box
AfterSales
Feb 9, 2024
Page 1 of 5
3
Service
WPR1
Technical Information
ENU 176/23
Required parts (Macan, Macan T)
Parts Info:
Part No.
Designation
– Location
Number
V04015001AQ
 Transfer box
– Macan / Macan T
1 piece
N 10625902
 Collared cheese head bolt with multiple-tooth
head, M10 x 70
- Transfer box to double-clutch transmission
4 pieces
PAF908322
 Double-collar screw M10 x 75
- Transfer box to double-clutch transmission
1 piece
PAB111220A
 Clamping sleeve, 65 x 88 mm
– Exhaust system
1 piece
PAF107722
 Hose clamp 36.1 x 9 x 0.6
– Cardan shaft to transfer box
1 piece
PAF108524
 Internal serration screw, M10 x 50
– Cardan shaft to final drive
6 pieces
95534919121
 Plate
– Cardan shaft to final drive
3 pieces
N 91201102
 Collared cheese head bolt with multiple-tooth
head, M10 x 25
– Front tunnel support
8 pieces
Part No.
Designation
– Location
Number
V04015001AR
 Transfer box
– Macan S / Macan GTS
1 piece
N 10625902
 Collared cheese head bolt with multiple-tooth
head, M10 x 70
- Transfer box to double-clutch transmission
4 pieces
Required parts (Macan S, Macan GTS)
Parts Info:
Feb 9, 2024
Page 2 of 5
AfterSales
Service
Technical Information
176/23 ENU
WPR1
PAF908322
 Double-collar screw M10 x 75
- Transfer box to double-clutch transmission
1 piece
PAB111220A
 Clamping sleeve, 65 x 88 mm
– Exhaust system
2 pieces
PAF107722
 Hose clamp 36.1 x 9 x 0.6
– Cardan shaft to transfer box
1 piece
PAF108524
 Internal serration screw, M10 x 50
– Cardan shaft to final drive
6 pieces
95534919121
 Plate
– Cardan shaft to final drive
3 pieces
N 91201102
 Collared cheese head bolt with multiple-tooth
head, M10 x 25
– Front tunnel support
8 pieces
3
Required tools
Tools:
•
•
•
•
•
9768 - Electronic torque wrench, 2–100 Nm (1.5–74 ftlb.)
V.A.G 1275A - Hose clip pliers
VAS 6931 - Transmission and gearbox jack
P90999 - PIWIS Tester 4
Battery charger with a current rating of at least 90 A, e.g. VAS 5908 - battery charger 90 A. For
further information about the battery chargers to be used, see the corresponding Workshop Manual.
 Workshop Manual '270689 Charging 12-volt lithium-ion vehicle electrical system battery'
Replacing transfer gear
Work Procedure: 1
Replace transfer gear.
 Workshop Manual '396555 Replacing transfer box'
Warranty processing
Information
The specified labor time was determined specifically for carrying out this campaign and includes all
necessary preliminary and subsequent rework. The labor time may differ from the labor times published
in the Labor Operation List in PCSS.
AfterSales
Feb 9, 2024
Page 3 of 5
3
Service
WPR1
Scope 1:
Technical Information
ENU 176/23
Replacing transfer gear
Labor time:
Replacing transfer gear
Includes:
Removing and installing cardan shaft
Removing and installing rear exhaust system
Replacing transfer box
Labor time: 273 TU
Required parts:
V04015001AQ
Transfer box
1 piece
N 10625902
Collared cheese head bolt with multiple-tooth
head, M10 x 70
4 pieces
PAF908322
Double-collar screw M10 x 75
1 piece
PAB111220A
Clamping sleeve, 65 x 88 mm
1 piece
PAF107722
Hose clamp 36.1 x 9 x 0.6
1 piece
PAF108524
Internal serration screw, M10 x 50
6 pieces
95534919121
Plate
3 pieces
N 91201102
Collared cheese head bolt with multiple-tooth
head, M10 x 25
8 pieces
 Damage Number WPR1 066 000 2
Warranty processing
Information
The specified labor times were determined specifically for carrying out this campaign and include all
necessary preliminary and subsequent rework. The labor times may differ from the labor times published
in the Labor Operation List in PCSS.
Scope 1:
Not relevant for this vehicle type.
Scope 2:
Replacing transfer gear
Labor time:
Replacing transfer gear
Includes:
Removing and installing cardan shaft
Removing and installing rear exhaust system
Labor time: 303 TU
Required parts:
V04015001AR
Feb 9, 2024
Page 4 of 5
Transfer box
AfterSales
1 piece
Service
Technical Information
176/23 ENU
WPR1
N 10625902
Collared cheese head bolt with multiple-tooth
head, M10 x 70
4 pieces
PAF908322
Double-collar screw M10 x 75
1 piece
PAB111220A
Clamping sleeve, 65 x 88 mm
2 pieces
PAF107722
Hose clamp 36.1 x 9 x 0.6
1 piece
PAF108524
Internal serration screw, M10 x 50
6 pieces
95534919121
Plate
3 pieces
N 91201102
Collared cheese head bolt with multiple-tooth
head, M10 x 25
8 pieces
3
 Damage Number WPR1 066 000 2
Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a
discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed.
© 2024 Porsche Cars North America, Inc.
AfterSales
Feb 9, 2024
Page 5 of 5