PIT6044G
Service Bulletin Details
Public Details for: PIT6044G
This preliminary information communicates that a software update is in the works and to disconnect the 12 volt battery to clear the codes.
Models from 2023
2023 BRIGHTDROP ZEVO 600 |
2023 CADILLAC LYRIQ |
2023 CADILLAC LYRIQ EV |
2023 GMC HUMMER EV |
Models from 2022
2022 GMC HUMMER EV |
Bulletin No.: PIT6044G Published date: 02/27/2024 Preliminary Information PIT6044G Service High Voltage with MIL and/or DTCs Models Model Years: VIN: Brand: Model: BrightDrop Zevo 600 eLCV 2023 ALL All All All Cadillac EV LYRIQ 2023 - 2024 ALL RZ108321 All All GMC HUMMER EV 2022 - 2024 ALL All All All GMC HUMMER EV SUV 2024 ALL All All All from to Engine: Transmissions: Involved Region or Country North America Condition Some customers may comment the MIL is illuminated or Service High Voltage Message displayed on the IPC. A technician may nd any of the following DTCs; U2220, U2221, U2222, U2223, U2224, U2225, U2226, U2227, U2228, U2229, U222A, U222B, U222C, U222D, U222E, U222F, U2230, U2231, U2232, U2233, U2234, U2235, U2236, U2237, and/or U2C11 set as current or history. Cause A potential software anomaly may be present. Correction: 1. Verify the vehicle has one or more of the following DTCs set; U2220, U2221, U2222, U2223, U2224, U2225, U2226, U2227, U2228, U2229, U222A, U222B, U222C, U222D, U222E, U222F, U2230, U2231, U2232, U2233, U2234, U2235, U2236, U2237, and/or U2C11 set as current or history. 2. Program the K16 Battery Energy Control Module (BECM) with the most recent software via SPS. 3. After programming the BECM, perform Manual Reset process twice. Manual Reset Process: A. Perform the Battery Negative Cable Disconnection and Connection procedure outlined in Service Information. Warning: Always ensure the Battery Maintenance Mode is inactive before disconnecting the 12-volt battery. This mode can be active with the ignition o , regardless of whether the vehicle charging cord is plugged in or not. When this mode is active, the on-board high voltage battery charger will energize the 12-volt battery cables and charge the 12-volt battery. Disconnecting the battery cables while this mode is active may result in an electrical shock or a burn from hot battery cable leads. B. Wait 15 mins, then reconnect the 12v following the Battery Negative Cable Disconnection and Connection procedure outlined in Service Information. C. Place the vehicle in Propulsion “Ready” mode for 10 seconds, (has power-steering) then turn the vehicle “OFF” and remove the keyless transmitter from the vehicle and place the transmitter in a safe location approximately 10 ft away. Wait 15 mins. D. Repeat Manual Reset Process steps A-C a total of 2 times. 4. Place the vehicle in Service mode (No power-steering) then use GDS2 and clear all DTCs. 5. If any of the following DTCs: U2220, U2221, U2222, U2223, U2224, U2225, U2226, U2227, U2228, U2229, U222A, U222B, U222C, U222D, U222E, U222F U2230, U2231, U2232, U2233, U2234, U2235, U2236, U2C11 and/or U2237 return, start a TAC case, and reference this P.I. Warranty Information For vehicles repaired under the Bumper-to-Bumper coverage (Canada Base Warranty coverage), use the following labor operation. Reference the Applicable Warranties section of Investigate Vehicle History (IVH) for coverage information. Labor Operation 5080388 Add Time (as Required) Description Labor Time Hybrid/Electric Vehicle Battery Pack Communication 1.5 Hr. Module manual reset K16 Battery Energy Control Module Program 0.4 Hr. *This is a unique Labor Operation for Bulletin use only Version History Version Modi ed 8 08/03/2023 - Created on. 08/09/2023 - Updated to include U2C11. 09/01/2023 - Updated to add more information for the LYRIQ. 09/05/2023 - Update more programming numbers for 2024 LYRIQ. 10/26/2023 - Update information for BrightDrop and HUMMER EV. 10/30/2023 - Updated correction. 12/01/2023 - Updated correction. 2/27/2023 - Updated correction. © 2024 General Motors. All Rights Reserved.